这个开源程序是FAST-LAB在github上分享出来的，可以让无人机集群自主飞行，规划航线，躲避障碍物。

ZJU-FAST-Lab/ego-planner-swarm: An efficient single/multi-agent trajectory planner for multicopters. (github.com)

Quick Start within 3 Minutes

Compiling tests passed on ubuntu 16.04, 18.04, and 20.04 with ros installed. You can just execute the following commands one by one.

sudo apt-get install libarmadillo-dev

git clone https://github.com/ZJU-FAST-Lab/ego-planner-swarm.git

cd ego-planner-swarm

catkin_make -j1

source devel/setup.bash

roslaunch ego_planner simple_run.launch

If you find this work useful or interesting, please kindly give us a star , thanks!

Acknowledgements

• This work extends EGO-Planner to swarm navigation.

EGO-Swarm

EGO-Swarm: A Fully Autonomous and Decentralized Quadrotor Swarm System in Cluttered Environments

EGO-Swarm is a decentralized and asynchronous systematic solution for multi-robot autonomous navigation in unknown obstacle-rich scenes using merely onboard resources.

   

Video Links: YouTube, bilibili (for Mainland China)

1. Related Paper

EGO-Swarm: A Fully Autonomous and Decentralized Quadrotor Swarm System in Cluttered Environments, Xin Zhou, Jiangchao Zhu, Hongyu Zhou, Chao Xu, and Fei Gao (Published in ICRA2021). Paper link and Science report.

2. Standard Compilation

Requirements: ubuntu 16.04, 18.04 or 20.04 with ros-desktop-full installation.

Step 1. Install Armadillo, which is required by uav_simulator.

sudo apt-get install libarmadillo-dev

Step 2. Clone the code from github or gitee. These two repositories synchronize automatically.

From github,

git clone https://github.com/ZJU-FAST-Lab/ego-planner-swarm.git

Step 3. Compile,

cd ego-planner

catkin_make -DCMAKE_BUILD_TYPE=Release -j1

Step 4. Run.

In a terminal at the ego-planner-swarm/ folder, open the rviz for visualization and interactions

source devel/setup.bash

roslaunch ego_planner rviz.launch

In another terminal at the ego-planner-swarm/, run the planner in simulation by

source devel/setup.bash

roslaunch ego_planner swarm.launch

Then you can follow the gif below to control the drone.

3. Using an IDE

We recommend using vscode, the project file has been included in the code you have cloned, which is the .vscode folder. This folder is hidden by default. Follow the steps below to configure the IDE for auto code completion & jump. It will take 3 minutes.

Step 1. Install C and CMake extentions in vscode.

Step 2. Re-compile the code using the command

catkin_make -DCMAKE_BUILD_TYPE=Release -DCMAKE_EXPORT_COMPILE_COMMANDS=Yes

It will export a compile commands file, which can help vscode to determine the code architecture.

Step 3. Launch vscode and select the ego-planner folder to open.

code ~/<......>/ego-planner-swarm/

Press Ctrl Shift B in vscode to compile the code. This command is defined in .vscode/tasks.json. You can add customized arguments after “args”. The default is “-DCMAKE_BUILD_TYPE=Release”.

Step 4. Close and re-launch vscode, you will see the vscode has already understood the code architecture and can perform auto completion & jump.

4. Use GPU or Not

Packages in this repo, local_sensing have GPU, CPU two different versions. By default, they are in CPU version for better compatibility. By changing

set(ENABLE_CUDA false)

in the CMakeList.txt in local_sensing packages, to

set(ENABLE_CUDA true)

CUDA will be turned-on to generate depth images as a real depth camera does.

Please remember to also change the ‘arch’ and ‘code’ flags in the line of

    set(CUDA_NVCC_FLAGS

      -gencode arch=compute_61,code=sm_61;

in CMakeList.txt, if you encounter compiling error due to different Nvidia graphics card you use. You can check the right code here.

Don’t forget to re-compile the code!

local_sensing is the simulated sensors. If ENABLE_CUDA true, it mimics the depth measured by stereo cameras and renders a depth image by GPU. If ENABLE_CUDA false, it will publish pointclouds with no ray-casting. Our local mapping module automatically selects whether depth images or pointclouds as its input.

For installation of CUDA, please go to CUDA ToolKit

5. Use Drone Simulation Considering Dynamics or Not

Typical simulations use a dynamic model to calculate the motion of the drone under given commands. However, it requires continuous iterations to solve a differential equation, which consumes quite a lot computation. When launching a swarm of drones, this computation burden may cause significant lag. On an i7 9700KF CPU I use, 15 drones are the upper limit. Therefore, for compatibility and scalability purposes, I use a “fake_drone” package to convert commands to drone odometry directly by default.

If you want to use a more realistic quadrotor model, you can un-comment the node quadrotor_simulator_so3 and so3_control/SO3ControlNodelet in simulator.xml to enable quadrotor simulation considering dynamics. Please don’t forget to comment the package poscmd_2_odom right after the above two nodes.

6. Utilize the Full Performance of CPU

The computation time of our planner is too short for the OS to increase CPU frequency, which makes the computation time tend to be longer and unstable.

Therefore, we recommend you to manually set the CPU frequency to the maximum. Firstly, install a tool by

sudo apt install cpufrequtils

Then you can set the CPU frequency to the maximum allowed by

sudo cpufreq-set -g performance

More information can be found in http://www.thinkwiki.org/wiki/How_to_use_cpufrequtils.

Note that CPU frequency may still decrease due to high temperature in high load.

Licence

The source code is released under GPLv3 license.

Maintenance

We are still working on extending the proposed system and improving code reliability.

For any technical issues, please contact Xin Zhou ([email protected]) or Fei GAO ([email protected]).

For commercial inquiries, please contact Fei GAO ([email protected]).

他们发表的论文 [2008.08835] EGO-Planner: An ESDF-free Gradient-based Local Planner for Quadrotors (arxiv.org)，全文如下：