4

Dual-LAN router board starts at $26

 3 years ago
source link: http://linuxgizmos.com/dual-lan-router-board-starts-at-26/
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.

Dual-LAN router board starts at $26

Apr 20, 2021 — by Eric Brown

— 89 views

wirelesstag_idosbc2d06v1a-thm.jpgWireless-Tag has launched a $26 “IDO-SBC2D06-V1A” SBC that runs Linux on a dual -A7 SigmaStar SSD201 or SSD202 with 2x 10/100 Ethernet ports, WiFi/BT, 40-pin GPIO, and a choice of MIPI-DSI connectors for 4- or 7-inch LCDs.

Last September, Chinese SoC manufacturer SigmaStar launched a $10 IDO-SOM2D01 compute module, which runs Linux on the company’s dual-core, Cortex-A7 based SSD201 SoC. Wireless-Tag, which also appears to be the manufacturer of the IDO-SOM2D0 module, has now launched a Raspberry Pi sized IDO-SBC2D06-V1A SBC, which sells on Taobao for 170 RMB ($26) when it equipped with the IDO-SOM2D01 module with the 64MB DDR2 equipped SSD201 SoC. The SBC costs 180 RMB ($27.60) for a new variant of the module with the almost identical SSD202, which offers 128MB DDR2.

IDO-SBC2D06-V1A, front and back
(click images to enlarge)

SigmaStar’s IDO-SOM2D01 and IDO-SOM2D02 modules add 2GB SPI NAND flash, a Singmaster SSW0101B WiFi/Bluetooth module, and dual 10/100 LAN controllers. Interfaces expressed via the 96 castellated edge pins include USB 2.0 host, 4-lane MIPI-DSI for 1920 x 1080 @ 60fps displays, and audio line-out, AMIC, and DMIC. You also get 4x UART, 2x I2C, 4x PWM, SDIO 2.0, I2S, SPI, and GPIO.

The IDO-SBC2D06-V1A SBC from Wireless-Tag runs Linux on the up to 1.2GHz SSD201 or SSD202. A GitHub page with driver code for the WiFi/BT module has been posted by the linux-chenzing community, which is working on mainline Linux support for the SSD201/SSD202.

IDO-SBC2D06-V1A (left) and its IDO-SOM2D01 module
(click images to enlarge)

The IDO-SBC2D06-V1A is equipped with dual 10/100Mbps Ethernet ports and a choice of MIPI-DSI connectors for either a 4-inch RGB-565 or 7-inch RGB-888 display. The latter is possibly the same screen used on a recently launched Industio IDO-SBC2D70 7-inch resistive touch-panel, which is based on the SSD201 or SSD202. CNXSoft, which first reported on the Wireless-Tag SBC, also covered MYZR’s SSD202-powered GW300 IoT gateway, which features a 4G LTE modem.


Industio IDO-SBC2D70 mainboard details (left) and MYZR GW300
(click images to enlarge)

Neither the Taobao shopping page or the Wireless-Tag website listed any additional specs that we could see, although the images suggest there is a microSD slot, 40-pin GPIO, and USB 2.0 host and micro-USB ports. You can also see UART and microphone headers and possibly a power input jack and coin-cell battery holder.

— ADVERTISEMENT —

Clear.png

Further information

The IDO-SBC2D06-V1A SBC is available on Taobao for 170 RMB ($26) with the 64MB SSD201 or 180 RMB ($27.60) with the 128MB SSD202. More information may be found on the Taobao shopping page and more may eventually appear on the Wireless-Tag website.


About Joyk


Aggregate valuable and interesting links.
Joyk means Joy of geeK