aluzjunior said:

I just bought an used Razer Phone 2 (in excellent condition) and the flashed last update of PixelExperience.
I have a few questions:
- Did not tried before install PixelExperience, but now wireless charging isn't working
- Bootload unlock warning message always display on boot, There's a way not to show it?
- There's a way to change screen resolution additionaly to reduce refresh rate?
- Benchmarks Apps don't run too, Antutu there's no "Start" button on screen and 3D Mark closes and shows a out of memory message

1.Wireless not working for everyone in PE rom.
2.You can't get rid of bootloader massage, only one way is to lock it back with stock rom, if you will lock it with PE you will Brick you phone forever
3. Unfortunately now there is no way to change resolution now, maybe later this feature be back
4. You cannot run Benchmark because all software thinks you are using Pixel Phone not Razer. And because your phone is in reality Razer Phone with complete different characteristics, it will crash, and why you need it? This firmware works way faster then stock RP Pie

s2601d said:

1.Wireless not working for everyone in PE rom.
2.You can't get rid of bootloader massage, only one way is to lock it back with stock rom, if you will lock it with PE you will Brick you phone forever
3. Unfortunately now there is no way to change resolution now, maybe later this feature be back
4. You cannot run Benchmark because all software thinks you are using Pixel Phone not Razer. And because your phone is in reality Razer Phone with complete different characteristics, it will crash, and why you need it? This firmware works way faster then stock RP Pie

not sure where you're getting that "no one" can wireless charge, but i can confirm that to be false, i have almost exclusively wireless charged since installing PE, I'm currently on PE Plus and still have wireless charging.

In regards to why I actually logged in to comment, can anyone tell me if I can flash magisk on PE+?

2. Can you update GPU OpenGL and Vulkan driver?
NO. Cause Razer used a modified a630 gpu firmware, Qualcomm generic new gl and vulkan can't compat with it. The only hope is Razer get revived and update stock rom so we can take it.

MrStee97 said:

not sure where you're getting that "no one" can wireless charge, but i can confirm that to be false, i have almost exclusively wireless charged since installing PE, I'm currently on PE Plus and still have wireless charging.

In regards to why I actually logged in to comment, can anyone tell me if I can flash magisk on PE+?

Yeah totally. I was running Magisk from day 1 until my c port crapped the bed.

muellerm30 said:

Yeah totally. I was running Magisk from day 1 until my c port crapped the bed.

Mines on the way, hence the exclusive wireless charging, but it's in just enough condition to get a connection at the right angle lol. I slapped an iPhone mag ring on the back of mine and use a magsafe puck to charge, thanks for the info though, I'll probably root ins few days, can you do it on the standard PE+ recovery?

Alcatraz323 said:

FAQ:
1. Verizon carrier out of service
Here is step to solve

https://forum.xda-developers.com/t/...-18-1-for-razer-phone-2.4288525/post-85228539

2. Can you update GPU OpenGL and Vulkan driver?
NO. Cause Razer used a modified a630 gpu firmware, Qualcomm generic new gl and vulkan can't compat with it. The only hope is Razer get revived and update stock rom so we can take it.

==============================================

Current Update:
Base version (non-plus):

2022.7.8
Device:

1. device: enable wifi display mouse input
2. kernel: merge 4.9.321
3. kernel: merge wireguard driver 1.0.20220627

Upstream:

1. July security patch
2. Updated translations
3. Fixed storage usage issue on OTA app
4. Other minor issues have been fixed

Plus version:
Dirty flash in rec to manually switch to Plus, but backup data in case for any accident!!!
Everything above included, and:

==============================================

History Updates (non-plus):
2021.12.12 (first release)

1. Introduce Android 12
2. fix flashlight and multi camera
3. fix refreshrate control
4. add chroma, dolby

2021.12.13

1. IMS, Mobile data fixed
2. Color profile now selectable not system crashing

2021.12.15

1. fix 1213's boot loop issue
2. fix ANR on android.hardware.secure_element

2021.12.21

1. fix sdcard issue, now it is fully functional on PE, also can format and using exFAT which has no 4G file size limit
2. fix fingerprint now shown on mine or los, but available on stock rom or arter kernel(dtbo disabled)

2021.12.24 (*Recommend clean flash for update)

1. sync PE stable
2. SeLinux enforcing
3. SafetyNet Passing

2022.1.14

1. fix system animation stuck
2. fix volume distortion under 50%
3. Sync PE upstream

2022.1.15

1. fix nfc issue

2022.1.18

1. fix fingerprint sleep to death
2. fix color mode issue(inverse color, color space simulation or color profile change cause bootloop)

2022.1.20

1. add system updater (OTA)

2022.2.23 (*OTA available)

1. kernel: merge upstream 4.9.302
2. kernel: merge Tag LA.UM.10.3.r1-00900-sdm845.0
3. device: fix refresh rate setting mismatch value and summary
4. February Security patch
5. Face Unlock added

2022.3.1 (*OTA available, but clean flash recommended for Dolby to keep alive)

1. device: totally fixed some game volume distortion or too low under 50%
2. device: fixed Dolby function and Dolby Tile service in systemui
3. device: fixed Ok Google function
4. device: fixed video cause screen freezing
5. device: add Aptx, Aptx HD codec
6. device: moved RazerParts App to Settings and add icon

2022.3.7 (*OTA available from 3.1 and after, but if FROM BEFORE 3.1, MUST CLEAN FLASH)

1. device: Fix Discord gif freezing
2. device: Fix mic too low
3. device: Add Dolby Atmos for a2dp
4. device: Add Built in Google Camera
5. device: RazerParts: chroma brightness fix
6. device: RazerParts: chroma on booting fix
7. device: RazerParts: function: kill chroma after screen lock
8. device: RazerParts: add 40hz refresh rate
9. device: RazerParts: fix Dolby Atmos jump
10. device: RazerParts: fix chroma switch override
11. device: Update WifiDisplay blobs

2022.3.31 (*OTA available from 3.1 and after, but if FROM BEFORE 3.1, MUST CLEAN FLASH)
Upstream:

1. Android 12L
2. March update

Device:

1. kernel: Merge tag LA.UM.10.3.r1-01000-sdm845.0
2. kernel: Merge 4.9.309
3. device: fix hardware decoder for video low fps
4. device: fix 4k video recording
5. device: update IMS related blobs
6. device: fix fingerprint animation location
7. device: add QuickTap function

2022.4.1 (*OTA available from 3.1 and after, but if FROM BEFORE 3.1, MUST CLEAN FLASH)
Tiny update from 3.31

1. device: fix 3.31's refresh rate can't switch
2. device: update MGC Gcam to 8.4.500_A10_V5

2022.4.16 (*OTA available from 3.1 and after, but if FROM BEFORE 3.1, MUST CLEAN FLASH)
Device:

1. device: fix aac for tws or normal headset
2. device: fix aac for truck bluetooth stereo
3. device: fix mic too low for any type video recording
4. device: fix mic crash for in game tws(like pubg)
5. device: fix Dolby conflict with ok google/adaptive sound
6. device: tune speaker least volume
7. device: add back Aptx, Aptx HD codec
8. device: universal audio fix
9. device: bring back active wake(pick up and wake/Doze)

Upstream:

1. April security patch
2. Fixed charging animation not appearing
3. Fixed unlock sound playing repeatedly
4. Updated translations
5. Others fixes

2022.5.27
Device:

1. kernel: merge LA.UM.10.3.r1-01700-sdm845.0 from Qualcomm
2. kernel: merge 4.9.316 from aosp
3. device: fix gpu error for "masterduel" and some other games
4. device: fix charge interrupt frequently under 50%
5. device: offline charging animation change(fixed bzzz lines)
6. device: Gcam update(telescope back)

Upstream:

1. May security patch
2. Updated translations and gapps
3. Fixed battery widget not working properly
4. Fixed rotation button not showing in 2-button navbar mode
5. Others fixes

2022.6.21
Device:

1. device: correct 2k screen display density & use 2k icons

Upstream:

1. June security patch
2. Updated translations
3. Fixed video playback issues on some devices
4. Fixed styling issues on DocumentsUI
5. Fixed ringtone selection for devices with e-SIM
6. Fixed location indicator showing when no apps running
7. Fixed app font on Pixel Launcher
8. Other minor issues have been fixed

2022.7.8
Device:

1. device: enable wifi display mouse input
2. kernel: merge 4.9.321
3. kernel: merge wireguard driver 1.0.20220627

Upstream:

1. July security patch
2. Updated translations
3. Fixed storage usage issue on OTA app
4. Other minor issues have been fixed

==============================================

History Plus Updates:
2022.4.21

1. LiveDisplay (color profile, display mode, reading mode, color calibration)
2. Hide Notch support.
3. StatusBar shortcuts
4. Rotation settings
5. Lock screen display (media cover, music visualizer, power menu)
6. Per-app volume settings
7. Increasing ring volume
8. Different gestures
9. Power and Volume button customisations
10. Network traffic monitor
11. Brightness (brightness slider, auto brightness, brightness control)
12. Quick settings (quick pulldown, title visibility, vibrate on touch, rows, columns)
13. more other functions

2022.5.27

1. Improved statusbar brightness control
2. Introduced more granular settings for hotspot(5G, always on, blacklist)
3. Reverted QS background on white theme to old style

2022.6.21

1. Fixed network traffic behavior when toggling clock position to center

2022.7.8

Click to expand...

For anyone wanna do this with a rooted device, the root will be removed. I just tried this and downloaded it on my other phone it was all good not saying its bad, but it removes root.

atomplayed said:

Can this be flashed over Lineage 19.1 or do I have to wipe first?
Main issue on 19.1 is that Android Auto crashes on startup

Must wipe

Alcatraz323 said:

8.15 updated, added stock camera, monet boot animation, audio quality tuning and more, check #2 for more details.

Also, Razer announced "Theme Shop" on stock Android 8.1, 9 will be shutdown forever after 8.24, if you guys want to try it, do it in time

Adding the stock camera back seems to have messed with the double tap power button to jump to camera: it doesn't work from the lock screen anymore when the camera app is set to the gcam port.

waffleboi9000 said:

Adding the stock camera back seems to have messed with the double tap power button to jump to camera: it doesn't work from the lock screen anymore when the camera app is set to the gcam port.

You should remove the default value you set for it. At no default state, every camera in system is selectable for double tap power button, just tested and working

Alcatraz323 said:

You should remove the default value you set for it. At no default state, every camera in system is selectable for double tap power button, just tested and working

I did the following: went to app info of gcam, cleared open by default preferences, and double tapped the power button. A prompt appeared allowing me to select a camera to open by default, and I selected gcam. While unlocked, gcam opened as expected, but when locked, I was prompted to unlock the device. After unlocking, gcam still didn't open.

waffleboi9000 said:

I did the following: went to app info of gcam, cleared open by default preferences, and double tapped the power button. A prompt appeared allowing me to select a camera to open by default, and I selected gcam. While unlocked, gcam opened as expected, but when locked, I was prompted to unlock the device. After unlocking, gcam still didn't open.

In this update I removed GcamGo, maybe only gcam go support that

m tr4nch said:

thank you for this rom! it has totally revived my rp2.

this may sound dumb, but is there any way to make a reliable nandroid backup with your recovery or adb? if not, would flashing arter's kernel break the rom?

thanks again

Arter kernel will break rom, you can root it and do Swift backup or Titanium Backup