[ROM] [Q-S] LineageOS With MicroG for Samsung S7 Flat/Edge
source link: https://forum.xda-developers.com/t/rom-q-s-lineageos-with-microg-for-samsung-s7-flat-edge.3921094/page-23#post-87012523
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
[ROM] [Q-S] LineageOS With MicroG for Samsung S7 Flat/Edge
Thread starter
Start date
Changelog
by ivan meler
18.05.2022
- Improved performance and stability of the device
- Added custom power saving mode power profile for CPU
- A-GNSS (A-GPS) lock speed has been improved
- Device HW revision made visible in settings
- Improved fast/slow charger detection
- Synchronized with LineageOS source
----------------------
- fixed: TeleService from location indicators.
TeleService is constantly checking its location (every 2-3 minutes).
Download link
lineage-19.1-20220518-microG-signed-herolte.zip
Download link
lineage-19.1-20220518-microG-signed-hero2lte.zip
Support for german users
Dashboard - LOS-Legacy®
Deine Android CommunityLineageOS microG 19 update available
Thanks for this work.
This update seems to work fine.
Since previous version (lineage-19.1-20220513-microG-signed-herolte.zip), I have just some trouble with adb which remains "offline" as previously.
I will test this version a couple of days
Thx,
Luc.
Reactions: Exodusnick
I will test this version a couple of days
I only have some problems with adb connexion and to activate "visual phone mailbox" as if configuration was removed. mailbox phone number was erased too.
I will downgrade to 2022-04-28 version to allow adb to operate.
Thx
Luc.
via OTA
Changelog
29.05.2022
- update bromite web view 102.0.5005.67
- update bromite Browser 102.0.5005.67
- Synced with LineageOS source
by ivan meler
26.05.2022.
- Updated libexynosdisplay from BSP to comply with some android 12 changes
- Removed unused build.prop entries
- Fixed few selinux denials related to hwc props
- Improved UI performance and stability
- Removed more unneeded patches for device support
Download link
lineage-19.1-20220528-microG-signed-herolte.zip
Download link
lineage-19.1-20220528-microG-signed-hero2lte.zip
Reactions: Ryu--X
And thanks again for the help .
OP Thread adapted.
Added I'm OP Thread
Download for hero2lte
Reactions: Ryu--X and expressluke
nutpants
Senior Member
keyboards connects to lineage-18.1-20211214-microG-signed-herolte.zip and 4 other devices without an issue.
it sees the device and asks you to type in the code but never seems to accept the input, just hangs
have not tested herolte with 19.1
I don't have to enter a code, just connect, nothing more.
LineageOS microG 19 update available
via OTA
Thanks for this update.
Trying this version, mailbox is available.
ADB connexion remains impossible on USB.
Luc.
I don't use adb and don't see why I should as I install everything via TWRP, including backups.
via OTA
Changelog
06.06.2022
- update bromite Browser to 102.0.5005.92
Download Samsung Flat
lineage-19.1-20220606-microG-signed-herolte.zip
Download Samsung Edge
lineage-19.1-20220606-microG-signed-hero2lte.zip
Reactions: Ryu--X
nutpants
Senior Member
It works for me under lineageos 19
I don't have to enter a code, just connect, nothing more.
all 4 of my keyboards ask for a pairing code they all work with 4 other devices and your android 11 rom but not android 19
tested latest also
lineage-19.1-20220606-microG-signed-hero2lte.zip
acts the same
Attachments
-
Screenshot_20220607-100458_Settings.png129 KB · Views: 11
I don't know why it doesn't work for you, but check the developer settings under Bluetooth to see if something has changed.
I removed it from the list and had it search again.
Try it again.
nutpants
Senior Member
I also had problems with the connection at the beginning, not with the keyboard but with the bose system that wanted me to enter the code.
I removed it from the list and had it search again.
Try it again.
fresh clean install ( just did it with new rom, nothing changed or installed) everything wiped but external sd card.
tried all 4 keyboards . it does not show up under previously connected devices so nothing to remove.
reset network and bluetooth setting also, no help
still fails to take the code. screen with code does not go away unless i cancel,
after even more testing i saw a toast that said wrong pin ( its was a very fast toast)when i had not yet entered anything and i have had a few double pop ups of the passcode.
then i have to search for new devices again.
it pairs to other phones easily
had a few will not connect to my bluetooth headset ( unable to communicate error) but it eventually did
Reactions: Exodusnick
ADB activated in the developer options ?
I don't use adb and don't see why I should as I install everything via TWRP, including backups.
When ADB is disabled on device, it is not detected. When ADB enabled, device is detected but offline, and I don't know howto set it online. Even I switch to last platform Version 33.0.2-8557947, it doesn't change anything.
I use it to copy or modify files or read logs when an application fails.
ADB works fine under TWRP 3.6.1_9-0 or using rom 19.1 update 2022-04-28.
This problem was previously solved by a new update, but I dont know changes made on device.
Thx
Luc.
Changelog
09.06.2022
- clean cache
- Synced with LineageOS source
new security update has not yet been merged from lineageos
Changelog
von ivan_meler
- Improved in-call audio quality drastically
- Addressed few more selinux denials
- Improved general stability and performance
thank you @Ivan_Meler
Download Samsung Flat
lineage-19.1-20220609-microG-signed-herolte.zip
Download Samsung Edge
lineage-19.1-20220609-microG-signed-hero2lte.zip
nutpants
Senior Member
still not able to get it to connect to a bluetooth keyboard that asks for a passcode.
tried 4 different keyboards again. all will not accept the passcode.
You must enter the code in your keyboard see video
Passcode in your keyboard end ten enter. As you can see it works .
nutpants
Senior Member
but not with los19 on my samaung edge s7
i know how to pair keyboards.
none of them are desktop keyboards they are all tablet or phone keyboards
No idea why it does not work for you.
There I am just speechless
But why do you necessarily want to connect a keyboard to the phone ?
I can not work with it at all do not get along with it lol
Top Liked Posts
-
i am on magisk 24.3 there is no working solution except a upgraded kernel.
it is a kernel issue and will never be addressed by the magisk team.
(they have labeled it as "wontfix" https://github.com/topjohnwu/Magisk/issues/5395 as its a mostly samsung old kernel issue)
if you never plan to fix it with a newer kernel then zygisk will never work.
amd magisk has stated that zygisk is the future of magisk
that is you the developers choice. if you don't care thats your prerogative
(i posted in two forums because they are listed as two separate developers.)you clearly have no idea what you are talking about so just.. stop it, i hate being rude to people and as i said this is fixed in magisk canary because magisk is what broke it to begin with, and no there was no kernel fix for this because even backporting patch from 3.19 wouldn't fix the issue magisk introduced.
so please explain how will new magisk version not work if canary which is base for next stable is already working.
You are clearly posting this in multiple places because you either want to piss people off or have no idea what you are talking about@expressluke thank you for transferring your thread to me .
And thanks again for the help .
OP Thread adapted.
Added I'm OP Thread
Download for hero2lteLineageOS microG 19.1 update available via OTA
Changelog
by ivan meler
07.05.2022.
- Improved battery usage logging for the display.
- QR code reader added to camera app (long hold icon and launch from context menu)
- Various performance and stability improvements
10.05.2022.
- Switch to the new libperfmgr power hal, which can be configured via /system/vendor/etc/powerhints.json
- DT2W adapted to the new power grid
- Muted gps notification for phone services (thanks Google for solving so many things for everyone)
- Improved battery life and performance
- Cleanup of all leftover patches that was used by the old PowerHal
------------------
14.05.2022
- Merged security update from May 2022.
- Synchronized with LineageOS source
- fixed permissions manager
lineage-19.1-20220513-microG-signed-herolte.zipflash the last canary build. works on my old j5 2016I also had problems with the connection at the beginning, not with the keyboard but with the bose system that wanted me to enter the code.
I removed it from the list and had it search again.
Try it again.fresh clean install ( just did it with new rom, nothing changed or installed) everything wiped but external sd card.
tried all 4 keyboards . it does not show up under previously connected devices so nothing to remove.
reset network and bluetooth setting also, no help
still fails to take the code. screen with code does not go away unless i cancel,
after even more testing i saw a toast that said wrong pin ( its was a very fast toast)when i had not yet entered anything and i have had a few double pop ups of the passcode.
then i have to search for new devices again.
it pairs to other phones easily
had a few will not connect to my bluetooth headset ( unable to communicate error) but it eventually did
Recommend
About Joyk
Aggregate valuable and interesting links.
Joyk means Joy of geeK