Setup OpenVPN Server on Ubuntu 22.04|20.04|18.04

Do you want to access the internet securely and safely while leveraging open and untrusted networks like Wi-Fi access points? Perhaps you want to watch your favourite videos or try out some popular new online casino. OpenVPN is a full-featured, open-source Secure Socket Layer (SSL) VPN solution that supports a wide range of configurations.

In this guide, I’ll show you an easy way to have OpenVPN Server installed on Ubuntu 22.04/20.04/18.04 and ready for clients to start using it. I know OpenVPN setup through a manual process can be challenging especially for new users not experienced with Linux and VPNs.

This method will work well with both Debian family distributions as well as Red Hat family. This guide is specific to Ubuntu 22.04/20.04/18.04, but the setup process will be similar for other distributions. It is a scripted way so anyone with basic Linux knowledge can follow along.

Step 1: Setup Prerequisites

Before you start installing any package on your Ubuntu server, we always recommend making sure that all system packages are updated:

sudo apt update
sudo apt upgrade

Once you update the system, we can begin the installation and configuration of OpenVPN server on Ubuntu 22.04/20.04/18.04 system. We will use openvpn-install script which let you set up your own VPN server in no more than a minute, even if you haven’t used OpenVPN before. It has been designed to be as unobtrusive and universal as possible.

Follow below steps to have OpenVPN server installed and running:

Step 2: Install git command line tool

Install git by running the command:

sudo apt-get install git

Step 3: Clone openvpn-install repository

Now clone the openvpn-install repository using git tool installed in Step one:

$ cd ~
$ git clone https://github.com/Nyr/openvpn-install.git
Cloning into 'openvpn-install'...
remote: Counting objects: 345, done.
remote: Total 345 (delta 0), reused 0 (delta 0), pack-reused 345
Receiving objects: 100% (345/345), 99.15 KiB | 681.00 KiB/s, done.
Resolving deltas: 100% (170/170), done.

Step 4: Change to openvpn-install and run OpenVPN installer

cd to the directoryopenvpn-install created by clone and run the installer script.

$ cd openvpn-install/
$ ls -1
LICENSE.txt
README.md
openvpn-install.sh
$ chmod +x openvpn-install.sh$ sudo ./openvpn-install.sh

You will get a couple of prompts to change or confirm default settings for the installation

Welcome to this OpenVPN "road warrior" installer!

I need to ask you a few questions before starting the setup.
You can leave the default options and just press enter if you are ok with them.

First, provide the IPv4 address of the network interface you want OpenVPN
listening to.
IP address: 192.168.10.2

Which protocol do you want for OpenVPN connections?
1) UDP (recommended)
2) TCP
Protocol [1-2]: 1

What port do you want OpenVPN listening to?
Port: 1194

Which DNS do you want to use with the VPN?
1) Current system resolvers
2) 1.1.1.1
3) Google
4) OpenDNS
5) Verisign
DNS [1-5]: 1

Finally, tell me your name for the client certificate.
Please, use one word only, no special characters.
Client name: client

Okay, that was all I needed. We are ready to set up your OpenVPN server now.
Press any key to continue... <Enter>

Press <Enter> after answering all the questions to start the installation process: If the installation was successful, you should get a success message at the end:

sing configuration from ./openssl-easyrsa.cnf
Check that the request matches the signature
Signature ok
The Subject's Distinguished Name is as follows
commonName            :ASN.1 12:'client'
Certificate is to be certified until Jul  4 07:53:27 2028 GMT (3650 days)

Write out database with 1 new entries
Data Base Updated
Using configuration from ./openssl-easyrsa.cnf

An updated CRL has been created.
CRL file: /etc/openvpn/easy-rsa/pki/crl.pem

394

Finished!

Your client configuration is available at: /root/client.ovpn
If you want to add more clients, you simply need to run this script again!

Main OpenVPN server configuration file is,/etc/openvpn/server.conf you are free to tune and tweak it to your liking.

$ cat  /etc/openvpn/server.conf 
port 1194
proto udp
dev tun
sndbuf 0
rcvbuf 0
ca ca.crt
cert server.crt
key server.key
dh dh.pem
auth SHA512
tls-auth ta.key 0
topology subnet
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"
keepalive 10 120
cipher AES-256-CBC
comp-lzo
user nobody
group nogroup
persist-key
persist-tun
status openvpn-status.log
verb 3
crl-verify crl.pem

A  tun0 virtual interface will be created during the setup process. This is used by OpenVPN clients subnet. Confirm its presence using:

$ ip ad | grep tun0
4: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 100
    inet 10.8.0.1/24 brd 10.8.0.255 scope global tun0

The default subnet for this interface is.10.8.0.0/24.OpenVPN server will be assigned 10.8.0.1 IP address:

$ ip route | grep tun0
10.8.0.0/24 dev tun0 proto kernel scope link src 10.8.0.1

To test this, use:

sudo apt-get install traceroute

Then:

$ traceroute 10.8.0.1
traceroute to 10.8.0.1 (10.8.0.1), 30 hops max, 60 byte packets
 1  node-01.computingforgeeks.com (10.8.0.1)  0.050 ms  0.018 ms  0.019 ms

Step 5: Generate OpenVPN user profile (.ovpn file)

After completing step 1 through 3, your VPN Server is ready for use. We need to generate VPN Profiles to be used by the users. The same script we used for the installation will be used for this. It manages the creation and revocation of user profiles.

$ sudo ./openvpn-install.sh 

Looks like OpenVPN is already installed.

What do you want to do?
   1) Add a new user
   2) Revoke an existing user
   3) Remove OpenVPN
   4) Exit
Select an option [1-4]: 1

Tell me a name for the client certificate.
Please, use one word only, no special characters.
Client name: josphat.mutai
Generating a 2048 bit RSA private key
...+++
.............................................................................................................................+++
writing new private key to '/etc/openvpn/easy-rsa/pki/private/josphat.mutai.key.8dsSsOTWPe'
-----
Using configuration from ./openssl-easyrsa.cnf
Check that the request matches the signature
Signature ok
The Subject's Distinguished Name is as follows
commonName            :ASN.1 12:'josphat.mutai'
Certificate is to be certified until Jul  4 08:10:32 2028 GMT (3650 days)

Write out database with 1 new entries
Data Base Updated

Client josphat.mutai added, configuration is available at: /root/josphat.mutai.ovpn

From the output you can confirm the location of my profile,/root/josphat.mutai.ovpn you need to copy this profile to the user. The location of the associated private key is also provided /etc/openvpn/easy-rsa/pki/private/josphat.mutai.key.8dsSsOTWPe

Step 6: Connect to OpenVPN Server from the client

You can use the VPN client of your choice to configure OpenVPN client on your operating system. For those who want to use Official OpenVPN client, go to the downloads page and get the latest release then install it.

Once Installed, on Windows, navigate to the directory with the ovpn profile, right click on the file name and select “Start OpenVPN on this config file“

For Linux users, you can use NetworkManager and openvpn plugin to connect to OpenVPN server.

Check my previous guide for how to: