env invocation (GNU Coreutils)
source link: https://www.gnu.org/software/coreutils/manual/html_node/env-invocation.html
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
23.2 env
: Run a command in a modified environment
env
runs a command with a modified environment. Synopses:
env [option]… [name=value]… [command [args]…] env -[v]S'[option]… [name=value]… [command [args]…]' env
env
is commonly used on first line of scripts (shebang line):
#!/usr/bin/env command #!/usr/bin/env -[v]S[option]… [name=value]… command [args]…
Operands of the form ‘variable=value’ set the environment variable variable to value value. value may be empty (‘variable=’). Setting a variable to an empty value is different from unsetting it. These operands are evaluated left-to-right, so if two operands mention the same variable the earlier is ignored.
Environment variable names can be empty, and can contain any characters other than ‘=’ and ASCII NUL. However, it is wise to limit yourself to names that consist solely of underscores, digits, and ASCII letters, and that begin with a non-digit, as applications like the shell do not work well with other names.
The first operand that does not contain the character ‘=’
specifies the program to invoke; it is
searched for according to the PATH
environment variable. Any
remaining arguments are passed as arguments to that program.
The program should not be a special built-in utility
(see Special built-in utilities).
Modifications to PATH
take effect prior to searching for
command. Use caution when reducing PATH
; behavior is
not portable when PATH
is undefined or omits key directories
such as /bin.
In the rare case that a utility contains a ‘=’ in the name, the
only way to disambiguate it from a variable assignment is to use an
intermediate command for command, and pass the problematic
program name via args. For example, if ./prog= is an
executable in the current PATH
:
env prog= true # runs 'true', with prog= in environment env ./prog= true # runs 'true', with ./prog= in environment env -- prog= true # runs 'true', with prog= in environment env sh -c '\prog= true' # runs 'prog=' with argument 'true' env sh -c 'exec "$@"' sh prog= true # also runs 'prog='
If no command name is specified following the environment
specifications, the resulting environment is printed. This is like
specifying the printenv
program.
For some examples, suppose the environment passed to env
contains ‘LOGNAME=rms’, ‘EDITOR=emacs’, and
‘PATH=.:/gnubin:/hacks’:
- Output the current environment.
$ env | LC_ALL=C sort EDITOR=emacs LOGNAME=rms PATH=.:/gnubin:/hacks
- Run
foo
with a reduced environment, preserving only the originalPATH
to avoid problems in locatingfoo
.env - PATH="$PATH" foo
- Run
foo
with the environment containing ‘LOGNAME=rms’, ‘EDITOR=emacs’, and ‘PATH=.:/gnubin:/hacks’, and guarantees thatfoo
was found in the file system rather than as a shell built-in.env foo
- Run
nemacs
with the environment containing ‘LOGNAME=foo’, ‘EDITOR=emacs’, ‘PATH=.:/gnubin:/hacks’, and ‘DISPLAY=gnu:0’.env DISPLAY=gnu:0 LOGNAME=foo nemacs
- Attempt to run the program
/energy/--
(as that is the only possible path search result); if the command exists, the environment will contain ‘LOGNAME=rms’ and ‘PATH=/energy’, and the arguments will be ‘e=mc2’, ‘bar’, and ‘baz’.env -u EDITOR PATH=/energy -- e=mc2 bar baz
23.2.1 General options
The program accepts the following options. Also see Common options. Options must precede operands.
‘-0’ ‘--null’
Output a zero byte (ASCII NUL) at the end of each line, rather than a newline. This option enables other programs to parse the output even when that output would contain data with embedded newlines.
‘-u name’ ‘--unset=name’
Remove variable name from the environment, if it was in the environment.
‘-’ ‘-i’ ‘--ignore-environment’
Start with an empty environment, ignoring the inherited environment.
‘-C dir’ ‘--chdir=dir’
Change the working directory to dir before invoking command.
This differs from the shell built-in cd
in that it starts
command as a subprocess rather than altering the shell’s own working
directory; this allows it to be chained with other commands that run commands
in a different context. For example:
# Run 'true' with /chroot as its root directory and /srv as its working # directory. chroot /chroot env --chdir=/srv true # Run 'true' with /build as its working directory, FOO=bar in its # environment, and a time limit of five seconds. env --chdir=/build FOO=bar timeout 5 true
‘--default-signal[=sig]’
Unblock and reset signal sig to its default signal handler.
Without sig all known signals are unblocked and reset to their defaults.
Multiple signals can be comma-separated. The following command runs
seq
with SIGINT and SIGPIPE set to their default
(which is to terminate the program):
env --default-signal=PIPE,INT seq 1000 | head -n1
In the following example, we see how this is not possible to do with traditional shells. Here the first trap command sets SIGPIPE to ignore. The second trap command ostensibly sets it back to its default, but POSIX mandates that the shell must not change inherited state of the signal - so it is a no-op.
trap '' PIPE && sh -c 'trap - PIPE ; seq inf | head -n1'
Using --default-signal=PIPE we can ensure the signal handling is set to its default behavior:
trap '' PIPE && sh -c 'env --default-signal=PIPE seq inf | head -n1'
‘--ignore-signal[=sig]’
Ignore signal sig when running a program. Without sig all
known signals are set to ignore. Multiple signals can be
comma-separated. The following command runs seq
with SIGINT set
to be ignored - pressing Ctrl-C will not terminate it:
env --ignore-signal=INT seq inf > /dev/null
‘SIGCHLD’ is special, in that --ignore-signal=CHLD might have no effect (POSIX says it’s unspecified).
Most operating systems do not allow ignoring ‘SIGKILL’, ‘SIGSTOP’ (and possibly other signals). Attempting to ignore these signals will fail.
Multiple (and contradictory) --default-signal=SIG and --ignore-signal=SIG options are processed left-to-right, with the latter taking precedence. In the following example, ‘SIGPIPE’ is set to default while ‘SIGINT’ is ignored:
env --default-signal=INT,PIPE --ignore-signal=INT
‘--block-signal[=sig]’
Block signal(s) sig from being delivered.
‘--list-signal-handling’
List blocked or ignored signals to stderr, before executing a command.
‘-v’ ‘--debug’
Show verbose information for each processing step.
$ env -v -uTERM A=B uname -s unset: TERM setenv: A=B executing: uname arg[0]= 'uname' arg[1]= '-s' Linux
When combined with -S it is recommended to list -v
first, e.g. env -vS'string'
.
‘-S string’ ‘--split-string=string’
process and split string into separate arguments used to pass
multiple arguments on shebang lines. env
supports FreeBSD’s
syntax of several escape sequences and environment variable
expansions. See below for details and examples.
Exit status:
0 if no command is specified and the environment is output
125 if env
itself fails
126 if command is found but cannot be invoked
127 if command cannot be found
the exit status of command otherwise
23.2.2 -S/--split-string usage in scripts
The -S/--split-string options enable using multiple arguments on the first one of scripts (shebang line, ‘#!’).
When a script’s interpreter is in a known location, scripts typically contain the absolute file name in their first line:
Shell script:#!/bin/sh echo hello
#!/usr/bin/perl print "hello\n";
#!/usr/bin/python3 print("hello")
When a script’s interpreter is in a non-standard location
in the PATH
environment variable, it is recommended
to use env
on the first line of the script to
find the executable and run it:
#!/usr/bin/env bash echo hello
#!/usr/bin/env perl print "hello\n";
#!/usr/bin/env python3 print("hello")
Most operating systems (e.g. GNU/Linux, BSDs) treat all text after the
first space as a single argument. When using env
in a script
it is thus not possible to specify multiple arguments.
In the following example:
#!/usr/bin/env perl -T -w print "hello\n";
The operating system treats ‘perl -T -w’ as one argument (the program’s name), and executing the script fails with:
/usr/bin/env: 'perl -T -w': No such file or directory
The -S option instructs env
to split the single string
into multiple arguments. The following example works as expected:
$ cat hello.pl #!/usr/bin/env -S perl -T -w print "hello\n"; $ chmod a+x hello.pl $ ./hello.pl hello
And is equivalent to running perl -T -w hello.pl
on the command line
prompt.
Testing and troubleshooting
To test env -S
on the command line, use single quotes for the
-S string to emulate a single paramter. Single quotes are not
needed when using env -S
in a shebang line on the first line of a
script (the operating system already treats it as one argument).
The following command is equivalent to the hello.pl script above:
$ env -S'perl -T -w' hello.pl
To troubleshoot -S usage add the -v as the first argument (before -S).
Using -vS on a shebang line in a script:
$ cat hello-debug.pl #!/usr/bin/env -vS perl -T -w print "hello\n"; $ chmod a+x hello-debug.pl $ ./hello-debug.pl split -S: 'perl -T -w' into: 'perl' & '-T' & '-w' executing: perl arg[0]= 'perl' arg[1]= '-T' arg[2]= '-w' arg[3]= './hello-debug.pl' hello
Using -vS on the command line prompt (adding single quotes):
$ env -vS'perl -T -w' hello-debug.pl split -S: 'perl -T -w' into: 'perl' & '-T' & '-w' executing: perl arg[0]= 'perl' arg[1]= '-T' arg[2]= '-w' arg[3]= 'hello-debug.pl' hello
23.2.3 -S/--split-string syntax
Splitting arguments by whitespace
Running env -Sstring
splits the string into
arguments based on unquoted spaces or tab characters.
In the following contrived example the awk
variable
‘OFS’ will be <space>xyz<space>
as these spaces are inside
double quotes. The other space characters are used as argument separators:
$ cat one.awk #!/usr/bin/env -S awk -v OFS=" xyz " -f BEGIN {print 1,2,3} $ chmod a+x one.awk $ ./one.awk 1 xyz 2 xyz 3
When using -S on the command line prompt, remember to add single quotes around the entire string:
$ env -S'awk -v OFS=" xyz " -f' one.awk 1 xyz 2 xyz 3
Escape sequences
env
supports several escape sequences. These sequences
are processed when unquoted or inside double quotes (unless otherwise noted).
Single quotes disable escape sequences except ‘\'’ and ‘\\’.
\c
Ignore the remaining characters in the string.
Cannot be used inside double quotes.\f
form-feed character (ASCII 0x0C)\n
new-line character (ASCII 0x0A)\r
carriage-return character (ASCII 0x0D)\t
tab character (ASCII 0x09)\v
vertical tab character (ASCII 0x0B)\#
A hash ‘#’ character. Used when a ‘#’ character
is needed as the first character of an argument (see ’comments’ section
below).\$
A dollar-sign character ‘$’. Unescaped ‘$’ characters
are used to expand environment variables (see ’variables’ section below).\_
Inside double-quotes, replaced with a single space character.
Outside quotes, treated as an argument separator. ‘\_’ can be used
to avoid space characters in a shebang line (see examples below).\"
A double-quote character.\'
A single-quote character.
This escape sequence works inside single-quoted strings.\\
A backslash character.
This escape sequence works inside single-quoted strings.The following awk
script will use tab character as input and output
field separator (instead of spaces and tabs):
$ cat tabs.awk #!/usr/bin/env -S awk -v FS="\t" -v OFS="\t" -f ...
Comments
The escape sequence ‘\c’ (used outside single/double quotes)
causes env
to ignore the rest of the string.
The ‘#’ character causes env
to ignore the rest of
the string when it appears as the first character of an argument.
Use ‘\#’ to reverse this behavior.
$ env -S'printf %s\n A B C' A B C $ env -S'printf %s\n A# B C' A# B C $ env -S'printf %s\n A #B C' A $ env -S'printf %s\n A \#B C' A #B C $ env -S'printf %s\n A\cB C' A
NOTE: The above examples use single quotes as they are executed on the command-line.
Environment variable expansion
The pattern ‘${VARNAME}’ is used to substitute a value from
the environment variable. The pattern must include the curly braces
(‘{’,‘}’). Without them env
will reject the string.
Special shell variables (such as ‘$@’, ‘$*’, ‘$$’) are
not supported.
If the environment variable is empty or not set, the pattern will be replaced
by an empty string. The value of ‘${VARNAME}’ will be that of
the executed env
, before any modifications using
-i/--ignore-environment/-u/--unset or
setting new values using ‘VAR=VALUE’.
The following python script prepends /opt/custom/modules to the python module search path environment variable (‘PYTHONPATH’):
$ cat custom.py #!/usr/bin/env -S PYTHONPATH=/opt/custom/modules/:${PYTHONPATH} python print "hello" ...
The expansion of ‘${PYTHONPATH}’ is performed by env
,
not by a shell. If the curly braces are omitted, env
will fail:
$ cat custom.py #!/usr/bin/env -S PYTHONPATH=/opt/custom/modules/:$PYTHONPATH python print "hello" ... $ chmod a+x custom.py $ custom.py /usr/bin/env: only ${VARNAME} expansion is supported, error at: $PYTHONPATH python
Environment variable expansion happens before clearing the environment (with -i) or unsetting specific variables (with -u):
$ env -S'-i OLDUSER=${USER} env' OLDUSER=gordon
Use -v to diagnose the operations step-by-step:
$ env -vS'-i OLDUSER=${USER} env' expanding ${USER} into 'gordon' split -S: '-i OLDUSER=${USER} env' into: '-i' & 'OLDUSER=gordon' & 'env' cleaning environ setenv: OLDUSER=gordon executing: env arg[0]= 'env' OLDUSER=gordon
Recommend
About Joyk
Aggregate valuable and interesting links.
Joyk means Joy of geeK