20
Nginx(二): worker 进程处理流程框架
source link: http://www.cnblogs.com/yougewe/p/13659987.html
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
Nginx 启动起来之后，会有几个进程运行：1. master 进程接收用户命令并做出响应; 2. worker 进程负责处理各网络事件，并同时接收来自master的处理协调命令；
master 主要是一控制命令，我们后面再说，而worker则是处理的nginx的核心任务，请求转发、反向代理、负载均衡等工作。所以我们先来啃啃worker这块硬骨头吧！
1. worker 主循环
worker 的启动是被master 操作的，作为一个 fork 出来的进程，它拥有和master一样的内存数据信息。但它的活动范围相对较小，所以它并不会替代master的位置。
// unix/ngx_process_cycle.c
void
ngx_master_process_cycle(ngx_cycle_t *cycle)
{
char *title;
u_char *p;
size_t size;
ngx_int_t i;
ngx_uint_t sigio;
sigset_t set;
struct itimerval itv;
ngx_uint_t live;
ngx_msec_t delay;
ngx_core_conf_t *ccf;
sigemptyset(&set);
sigaddset(&set, SIGCHLD);
sigaddset(&set, SIGALRM);
sigaddset(&set, SIGIO);
sigaddset(&set, SIGINT);
sigaddset(&set, ngx_signal_value(NGX_RECONFIGURE_SIGNAL));
sigaddset(&set, ngx_signal_value(NGX_REOPEN_SIGNAL));
sigaddset(&set, ngx_signal_value(NGX_NOACCEPT_SIGNAL));
sigaddset(&set, ngx_signal_value(NGX_TERMINATE_SIGNAL));
sigaddset(&set, ngx_signal_value(NGX_SHUTDOWN_SIGNAL));
sigaddset(&set, ngx_signal_value(NGX_CHANGEBIN_SIGNAL));
if (sigprocmask(SIG_BLOCK, &set, NULL) == -1) {
ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno,
"sigprocmask() failed");
}
sigemptyset(&set);
size = sizeof(master_process);
for (i = 0; i < ngx_argc; i++) {
size += ngx_strlen(ngx_argv[i]) + 1;
}
title = ngx_pnalloc(cycle->pool, size);
if (title == NULL) {
/* fatal */
exit(2);
}
p = ngx_cpymem(title, master_process, sizeof(master_process) - 1);
for (i = 0; i < ngx_argc; i++) {
*p++ = ' ';
p = ngx_cpystrn(p, (u_char *) ngx_argv[i], size);
}
ngx_setproctitle(title);
ccf = (ngx_core_conf_t *) ngx_get_conf(cycle->conf_ctx, ngx_core_module);
// 启动之后会主动启动 worker 进程
ngx_start_worker_processes(cycle, ccf->worker_processes,
NGX_PROCESS_RESPAWN);
ngx_start_cache_manager_processes(cycle, 0);
ngx_new_binary = 0;
delay = 0;
sigio = 0;
live = 1;
for ( ;; ) {
if (delay) {
if (ngx_sigalrm) {
sigio = 0;
delay *= 2;
ngx_sigalrm = 0;
}
ngx_log_debug1(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"termination cycle: %M", delay);
itv.it_interval.tv_sec = 0;
itv.it_interval.tv_usec = 0;
itv.it_value.tv_sec = delay / 1000;
itv.it_value.tv_usec = (delay % 1000 ) * 1000;
if (setitimer(ITIMER_REAL, &itv, NULL) == -1) {
ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno,
"setitimer() failed");
}
}
ngx_log_debug0(NGX_LOG_DEBUG_EVENT, cycle->log, 0, "sigsuspend");
sigsuspend(&set);
ngx_time_update();
ngx_log_debug1(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"wake up, sigio %i", sigio);
if (ngx_reap) {
ngx_reap = 0;
ngx_log_debug0(NGX_LOG_DEBUG_EVENT, cycle->log, 0, "reap children");
live = ngx_reap_children(cycle);
}
if (!live && (ngx_terminate || ngx_quit)) {
ngx_master_process_exit(cycle);
}
if (ngx_terminate) {
if (delay == 0) {
delay = 50;
}
if (sigio) {
sigio--;
continue;
}
sigio = ccf->worker_processes + 2 /* cache processes */;
if (delay > 1000) {
ngx_signal_worker_processes(cycle, SIGKILL);
} else {
ngx_signal_worker_processes(cycle,
ngx_signal_value(NGX_TERMINATE_SIGNAL));
}
continue;
}
if (ngx_quit) {
ngx_signal_worker_processes(cycle,
ngx_signal_value(NGX_SHUTDOWN_SIGNAL));
ngx_close_listening_sockets(cycle);
continue;
}
if (ngx_reconfigure) {
ngx_reconfigure = 0;
if (ngx_new_binary) {
ngx_start_worker_processes(cycle, ccf->worker_processes,
NGX_PROCESS_RESPAWN);
ngx_start_cache_manager_processes(cycle, 0);
ngx_noaccepting = 0;
continue;
}
ngx_log_error(NGX_LOG_NOTICE, cycle->log, 0, "reconfiguring");
cycle = ngx_init_cycle(cycle);
if (cycle == NULL) {
cycle = (ngx_cycle_t *) ngx_cycle;
continue;
}
ngx_cycle = cycle;
ccf = (ngx_core_conf_t *) ngx_get_conf(cycle->conf_ctx,
ngx_core_module);
// 收到reconfig命令时，重启worker 进程
ngx_start_worker_processes(cycle, ccf->worker_processes,
NGX_PROCESS_JUST_RESPAWN);
ngx_start_cache_manager_processes(cycle, 1);
/* allow new processes to start */
ngx_msleep(100);
live = 1;
ngx_signal_worker_processes(cycle,
ngx_signal_value(NGX_SHUTDOWN_SIGNAL));
}
if (ngx_restart) {
ngx_restart = 0;
// 收到重启命令时，传递消息给 worker
ngx_start_worker_processes(cycle, ccf->worker_processes,
NGX_PROCESS_RESPAWN);
ngx_start_cache_manager_processes(cycle, 0);
live = 1;
}
if (ngx_reopen) {
ngx_reopen = 0;
ngx_log_error(NGX_LOG_NOTICE, cycle->log, 0, "reopening logs");
ngx_reopen_files(cycle, ccf->user);
ngx_signal_worker_processes(cycle,
ngx_signal_value(NGX_REOPEN_SIGNAL));
}
if (ngx_change_binary) {
ngx_change_binary = 0;
ngx_log_error(NGX_LOG_NOTICE, cycle->log, 0, "changing binary");
ngx_new_binary = ngx_exec_new_binary(cycle, ngx_argv);
}
if (ngx_noaccept) {
ngx_noaccept = 0;
ngx_noaccepting = 1;
ngx_signal_worker_processes(cycle,
ngx_signal_value(NGX_SHUTDOWN_SIGNAL));
}
}
}
static void
ngx_start_worker_processes(ngx_cycle_t *cycle, ngx_int_t n, ngx_int_t type)
{
ngx_int_t i;
ngx_channel_t ch;
ngx_log_error(NGX_LOG_NOTICE, cycle->log, 0, "start worker processes");
ngx_memzero(&ch, sizeof(ngx_channel_t));
ch.command = NGX_CMD_OPEN_CHANNEL;
// n 代表worker的进程数， 在 nginx.conf 中配置
for (i = 0; i < n; i++) {
// 依次启动 worker 进程，实际上就是通过fork进行子进程启动的
ngx_spawn_process(cycle, ngx_worker_process_cycle,
(void *) (intptr_t) i, "worker process", type);
ch.pid = ngx_processes[ngx_process_slot].pid;
ch.slot = ngx_process_slot;
ch.fd = ngx_processes[ngx_process_slot].channel[0];
ngx_pass_open_channel(cycle, &ch);
}
}
ngx_pid_t
ngx_spawn_process(ngx_cycle_t *cycle, ngx_spawn_proc_pt proc, void *data,
char *name, ngx_int_t respawn)
{
u_long on;
ngx_pid_t pid;
ngx_int_t s;
if (respawn >= 0) {
s = respawn;
} else {
for (s = 0; s < ngx_last_process; s++) {
if (ngx_processes[s].pid == -1) {
break;
}
}
if (s == NGX_MAX_PROCESSES) {
ngx_log_error(NGX_LOG_ALERT, cycle->log, 0,
"no more than %d processes can be spawned",
NGX_MAX_PROCESSES);
return NGX_INVALID_PID;
}
}
if (respawn != NGX_PROCESS_DETACHED) {
/* Solaris 9 still has no AF_LOCAL */
if (socketpair(AF_UNIX, SOCK_STREAM, 0, ngx_processes[s].channel) == -1)
{
ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno,
"socketpair() failed while spawning \"%s\"", name);
return NGX_INVALID_PID;
}
ngx_log_debug2(NGX_LOG_DEBUG_CORE, cycle->log, 0,
"channel %d:%d",
ngx_processes[s].channel[0],
ngx_processes[s].channel[1]);
if (ngx_nonblocking(ngx_processes[s].channel[0]) == -1) {
ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno,
ngx_nonblocking_n " failed while spawning \"%s\"",
name);
ngx_close_channel(ngx_processes[s].channel, cycle->log);
return NGX_INVALID_PID;
}
if (ngx_nonblocking(ngx_processes[s].channel[1]) == -1) {
ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno,
ngx_nonblocking_n " failed while spawning \"%s\"",
name);
ngx_close_channel(ngx_processes[s].channel, cycle->log);
return NGX_INVALID_PID;
}
on = 1;
if (ioctl(ngx_processes[s].channel[0], FIOASYNC, &on) == -1) {
ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno,
"ioctl(FIOASYNC) failed while spawning \"%s\"", name);
ngx_close_channel(ngx_processes[s].channel, cycle->log);
return NGX_INVALID_PID;
}
if (fcntl(ngx_processes[s].channel[0], F_SETOWN, ngx_pid) == -1) {
ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno,
"fcntl(F_SETOWN) failed while spawning \"%s\"", name);
ngx_close_channel(ngx_processes[s].channel, cycle->log);
return NGX_INVALID_PID;
}
if (fcntl(ngx_processes[s].channel[0], F_SETFD, FD_CLOEXEC) == -1) {
ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno,
"fcntl(FD_CLOEXEC) failed while spawning \"%s\"",
name);
ngx_close_channel(ngx_processes[s].channel, cycle->log);
return NGX_INVALID_PID;
}
if (fcntl(ngx_processes[s].channel[1], F_SETFD, FD_CLOEXEC) == -1) {
ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno,
"fcntl(FD_CLOEXEC) failed while spawning \"%s\"",
name);
ngx_close_channel(ngx_processes[s].channel, cycle->log);
return NGX_INVALID_PID;
}
ngx_channel = ngx_processes[s].channel[1];
} else {
ngx_processes[s].channel[0] = -1;
ngx_processes[s].channel[1] = -1;
}
ngx_process_slot = s;
// fork 出子进程出来
pid = fork();
switch (pid) {
case -1:
ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno,
"fork() failed while spawning \"%s\"", name);
ngx_close_channel(ngx_processes[s].channel, cycle->log);
return NGX_INVALID_PID;
case 0:
ngx_parent = ngx_pid;
ngx_pid = ngx_getpid();
// 子进程将调用传入的处理方法，worker 则会进入循环处理事件逻辑中
// 即 ngx_worker_process_cycle 循环
proc(cycle, data);
break;
default:
break;
}
ngx_log_error(NGX_LOG_NOTICE, cycle->log, 0, "start %s %P", name, pid);
ngx_processes[s].pid = pid;
ngx_processes[s].exited = 0;
if (respawn >= 0) {
return pid;
}
ngx_processes[s].proc = proc;
ngx_processes[s].data = data;
ngx_processes[s].name = name;
ngx_processes[s].exiting = 0;
switch (respawn) {
case NGX_PROCESS_NORESPAWN:
ngx_processes[s].respawn = 0;
ngx_processes[s].just_spawn = 0;
ngx_processes[s].detached = 0;
break;
case NGX_PROCESS_JUST_SPAWN:
ngx_processes[s].respawn = 0;
ngx_processes[s].just_spawn = 1;
ngx_processes[s].detached = 0;
break;
case NGX_PROCESS_RESPAWN:
ngx_processes[s].respawn = 1;
ngx_processes[s].just_spawn = 0;
ngx_processes[s].detached = 0;
break;
case NGX_PROCESS_JUST_RESPAWN:
ngx_processes[s].respawn = 1;
ngx_processes[s].just_spawn = 1;
ngx_processes[s].detached = 0;
break;
case NGX_PROCESS_DETACHED:
ngx_processes[s].respawn = 0;
ngx_processes[s].just_spawn = 0;
ngx_processes[s].detached = 1;
break;
}
if (s == ngx_last_process) {
ngx_last_process++;
}
return pid;
}
// os/unix/ngx_process_cycle.c
// worker 主循环服务
static void
ngx_worker_process_cycle(ngx_cycle_t *cycle, void *data)
{
ngx_int_t worker = (intptr_t) data;
ngx_process = NGX_PROCESS_WORKER;
ngx_worker = worker;
ngx_worker_process_init(cycle, worker);
// 进程标题 worker process
ngx_setproctitle("worker process");
// 死循环处理 worker 事务
for ( ;; ) {
// 大部分逻辑在接受 master 传递过来折命令
if (ngx_exiting) {
if (ngx_event_no_timers_left() == NGX_OK) {
ngx_log_error(NGX_LOG_NOTICE, cycle->log, 0, "exiting");
ngx_worker_process_exit(cycle);
}
}
ngx_log_debug0(NGX_LOG_DEBUG_EVENT, cycle->log, 0, "worker cycle");
// 这是其核心任务，检测事件、处理事件
ngx_process_events_and_timers(cycle);
// 大部分逻辑在接受 master 传递过来折命令
if (ngx_terminate) {
ngx_log_error(NGX_LOG_NOTICE, cycle->log, 0, "exiting");
ngx_worker_process_exit(cycle);
}
// 退出事件
if (ngx_quit) {
ngx_quit = 0;
ngx_log_error(NGX_LOG_NOTICE, cycle->log, 0,
"gracefully shutting down");
ngx_setproctitle("worker process is shutting down");
if (!ngx_exiting) {
ngx_exiting = 1;
ngx_set_shutdown_timer(cycle);
ngx_close_listening_sockets(cycle);
ngx_close_idle_connections(cycle);
}
}
// reopen 事件
if (ngx_reopen) {
ngx_reopen = 0;
ngx_log_error(NGX_LOG_NOTICE, cycle->log, 0, "reopening logs");
ngx_reopen_files(cycle, -1);
}
}
}
上面就是nginx worker的主要功能体现, 使用一个死循环提供服务. 有很多是接口master命令进行响应的逻辑, 咱们忽略其对master命令的响应，观其业务核心: ngx_process_events_and_timers .
// event/ngx_event.c
// nginx worker 处理io事件和超时队列流程
void
ngx_process_events_and_timers(ngx_cycle_t *cycle)
{
ngx_uint_t flags;
ngx_msec_t timer, delta;
if (ngx_timer_resolution) {
timer = NGX_TIMER_INFINITE;
flags = 0;
} else {
// 获取timer
timer = ngx_event_find_timer();
flags = NGX_UPDATE_TIME;
#if (NGX_WIN32)
/* handle signals from master in case of network inactivity */
if (timer == NGX_TIMER_INFINITE || timer > 500) {
timer = 500;
}
#endif
}
// 使用锁进行 tcp 监听
// 该锁基于 shm 实现，多进程共享内存
if (ngx_use_accept_mutex) {
// disabled 用于优化监听锁竞争，直到 ngx_accept_disabled 小于0
if (ngx_accept_disabled > 0) {
ngx_accept_disabled--;
} else {
// 通过 shm 获取一个进程锁，没抢到锁则直接返回了
// 获取到accept锁之后，其会注册 read 事件监听，所以，当其返回后，则意味着数据就绪
if (ngx_trylock_accept_mutex(cycle) == NGX_ERROR) {
return;
}
// 获取到锁，设置 flags
if (ngx_accept_mutex_held) {
flags |= NGX_POST_EVENTS;
} else {
if (timer == NGX_TIMER_INFINITE
|| timer > ngx_accept_mutex_delay)
{
timer = ngx_accept_mutex_delay;
}
}
}
}
// post 事件队列不为空，则触发事件处理
if (!ngx_queue_empty(&ngx_posted_next_events)) {
ngx_event_move_posted_next(cycle);
timer = 0;
}
delta = ngx_current_msec;
// 处理事件 ngx_event_actions.process_events, 将会进行阻塞等待
// 此处的 ngx_event_actions 由系统决定如何初始化，如 linux 下
// 使用 event/modules/ngx_epoll_module.c 中的定义 ngx_event_actions = ngx_epoll_module_ctx.actions;
// 而其他系统则另外决定, 总体来说可能有以下几种可能
// ngx_devpoll_module_ctx.actions;
// ngx_epoll_module_ctx.actions;
// ngx_eventport_module_ctx.actions;
// ngx_iocp_module_ctx.actions;
// ngx_kqueue_module_ctx.actions;
// ngx_select_module_ctx.actions;
// ngx_poll_module_ctx.actions;
/**
* 其定义样例如下:
static ngx_event_module_t ngx_select_module_ctx = {
&select_name,
NULL, /* create configuration */
ngx_select_init_conf, /* init configuration */
{
ngx_select_add_event, /* add an event */
ngx_select_del_event, /* delete an event */
ngx_select_add_event, /* enable an event */
ngx_select_del_event, /* disable an event */
NULL, /* add an connection */
NULL, /* delete an connection */
NULL, /* trigger a notify */
ngx_select_process_events, /* process the events */
ngx_select_init, /* init the events */
ngx_select_done /* done the events */
}
};
*/
(void) ngx_process_events(cycle, timer, flags);
// 计算耗时
delta = ngx_current_msec - delta;
ngx_log_debug1(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"timer delta: %M", delta);
// 处理 posted 事件，它存放在 ngx_posted_accept_events 队列中
ngx_event_process_posted(cycle, &ngx_posted_accept_events);
// 处理完事件后，释放锁
if (ngx_accept_mutex_held) {
ngx_shmtx_unlock(&ngx_accept_mutex);
}
// 处理超时的任务
if (delta) {
ngx_event_expire_timers();
}
// 读写事件将会被添加到 ngx_posted_events 队列中
ngx_event_process_posted(cycle, &ngx_posted_events);
}
以上也就是nginx worker的主要功能框架了:
1. 先通过shm获取tcp的监听锁, 避免socket惊群;
2. 获取到锁的worker进程, 将会注册accept的read事件;
3. 如果有 ngx_posted_next_events 队列, 则先处理其队列请求;
4. 根据系统类型调用网络io模块, select 机制接收io事件;
5. 接入accept事件后, 释放accept锁(基于shm);
6. 处理过期超时队列;
7. 处理普通的已接入的socket的读写事件;
一次处理往往只会处理部分事件, 比如可能只是处理了 accept, read 则需要在下一次或n次之后才会处理, 这也是异步机制非阻塞的体现.
下面我先给到一个整个worker的工作时序图, 以便有个整体的认知.
接下来我们从几个点依次简单看看 nginx 是如何处理各细节的.
2. 获取accept锁及注册accept事件
由于nginx是基于多进程实现的并发处理, 那么各进程必然都需要监听相同的端口数据, 如果没有锁控制, 则当有事件到达时, 必然导致各进程同时被唤醒, 即所谓的惊群. 所以, nginx 提供了一个锁机制, 使同一时刻只有一个进程在监听某端口, 从而避免竞争. 实现方式是基于共享内存 shm 实现.(如果是多线程方式会更简单哟)
// event/ngx_event_accept.c
ngx_int_t
ngx_trylock_accept_mutex(ngx_cycle_t *cycle)
{
// 首先获取shm锁, 通过 shm 实现进程数据共享
if (ngx_shmtx_trylock(&ngx_accept_mutex)) {
ngx_log_debug0(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"accept mutex locked");
// 如果上一次就是自己执行的accept操作, 则直接返回
// 否则需要重新注册accept监听
if (ngx_accept_mutex_held && ngx_accept_events == 0) {
return NGX_OK;
}
// 注册 accept 事件
if (ngx_enable_accept_events(cycle) == NGX_ERROR) {
ngx_shmtx_unlock(&ngx_accept_mutex);
return NGX_ERROR;
}
ngx_accept_events = 0;
ngx_accept_mutex_held = 1;
return NGX_OK;
}
ngx_log_debug1(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"accept mutex lock failed: %ui", ngx_accept_mutex_held);
if (ngx_accept_mutex_held) {
// 如果没有获取到锁，则将之前注册的 accept 事件取消，避免惊群
if (ngx_disable_accept_events(cycle, 0) == NGX_ERROR) {
return NGX_ERROR;
}
ngx_accept_mutex_held = 0;
}
// 不管有没有获取到锁, 都会执行后续的逻辑, 因为除了 accept 外, 还有read/write事件需要处理
return NGX_OK;
}
// core/ngx_shmtx.c, 获取锁，锁的值为当前进程id
ngx_uint_t
ngx_shmtx_trylock(ngx_shmtx_t *mtx)
{
return (*mtx->lock == 0 && ngx_atomic_cmp_set(mtx->lock, 0, ngx_pid));
}
// 注册 accept 事件监听
// event/ngx_event_accept.c
ngx_int_t
ngx_enable_accept_events(ngx_cycle_t *cycle)
{
ngx_uint_t i;
ngx_listening_t *ls;
ngx_connection_t *c;
ls = cycle->listening.elts;
for (i = 0; i < cycle->listening.nelts; i++) {
c = ls[i].connection;
if (c == NULL || c->read->active) {
continue;
}
// 注册accept事件，READ ?
// 交由 ngx_event_actions.add 处理, 实际运行由系统决定, 如 ngx_select_add_event
if (ngx_add_event(c->read, NGX_READ_EVENT, 0) == NGX_ERROR) {
return NGX_ERROR;
}
}
return NGX_OK;
}
// event/module/ngx_select_module.c
// 注册一个 io 事件监听, fd_set
static ngx_int_t
ngx_select_add_event(ngx_event_t *ev, ngx_int_t event, ngx_uint_t flags)
{
ngx_connection_t *c;
c = ev->data;
ngx_log_debug2(NGX_LOG_DEBUG_EVENT, ev->log, 0,
"select add event fd:%d ev:%i", c->fd, event);
if (ev->index != NGX_INVALID_INDEX) {
ngx_log_error(NGX_LOG_ALERT, ev->log, 0,
"select event fd:%d ev:%i is already set", c->fd, event);
return NGX_OK;
}
if ((event == NGX_READ_EVENT && ev->write)
|| (event == NGX_WRITE_EVENT && !ev->write))
{
ngx_log_error(NGX_LOG_ALERT, ev->log, 0,
"invalid select %s event fd:%d ev:%i",
ev->write ? "write" : "read", c->fd, event);
return NGX_ERROR;
}
if (event == NGX_READ_EVENT) {
FD_SET(c->fd, &master_read_fd_set);
} else if (event == NGX_WRITE_EVENT) {
FD_SET(c->fd, &master_write_fd_set);
}
if (max_fd != -1 && max_fd < c->fd) {
max_fd = c->fd;
}
ev->active = 1;
event_index[nevents] = ev;
ev->index = nevents;
nevents++;
return NGX_OK;
}
主要就是shm的应用，以及fd_set处理。
3. 通用处理队列实现
在 ngx_process_events_and_timers 中, 我们看到, 在io事件返回之后, 都会多次进行队列处理. 它们的不同仅在于 队列不同. 那么, 它是如何实现这个处理过程的呢?
我们分两块来看这事: 1. 队列的数据结构; 2. 执行队列任务; so... 就这样呗.
// 1. 队列数据结构
// 额, 两个循环嵌套的指针就是其结构了
typedef struct ngx_queue_s ngx_queue_t;
struct ngx_queue_s {
ngx_queue_t *prev;
ngx_queue_t *next;
};
// 实际上, 此处还会有一个强制类型转换 ngx_event_t
typedef struct ngx_event_s ngx_event_t;
struct ngx_event_s {
void *data;
unsigned write:1;
unsigned accept:1;
/* used to detect the stale events in kqueue and epoll */
unsigned instance:1;
/*
* the event was passed or would be passed to a kernel;
* in aio mode - operation was posted.
*/
unsigned active:1;
unsigned disabled:1;
/* the ready event; in aio mode 0 means that no operation can be posted */
unsigned ready:1;
unsigned oneshot:1;
/* aio operation is complete */
unsigned complete:1;
unsigned eof:1;
unsigned error:1;
unsigned timedout:1;
unsigned timer_set:1;
unsigned delayed:1;
unsigned deferred_accept:1;
/* the pending eof reported by kqueue, epoll or in aio chain operation */
unsigned pending_eof:1;
unsigned posted:1;
unsigned closed:1;
/* to test on worker exit */
unsigned channel:1;
unsigned resolver:1;
unsigned cancelable:1;
#if (NGX_HAVE_KQUEUE)
unsigned kq_vnode:1;
/* the pending errno reported by kqueue */
int kq_errno;
#endif
/*
* kqueue only:
* accept: number of sockets that wait to be accepted
* read: bytes to read when event is ready
* or lowat when event is set with NGX_LOWAT_EVENT flag
* write: available space in buffer when event is ready
* or lowat when event is set with NGX_LOWAT_EVENT flag
*
* iocp: TODO
*
* otherwise:
* accept: 1 if accept many, 0 otherwise
* read: bytes to read when event is ready, -1 if not known
*/
int available;
// 这个handler 比较重要, 它决定了本事件如何进行处理
ngx_event_handler_pt handler;
#if (NGX_HAVE_IOCP)
ngx_event_ovlp_t ovlp;
#endif
ngx_uint_t index;
ngx_log_t *log;
ngx_rbtree_node_t timer;
// queue 则是存放整个队列所有数据的地方
/* the posted queue */
ngx_queue_t queue;
#if 0
/* the threads support */
/*
* the event thread context, we store it here
* if $(CC) does not understand __thread declaration
* and pthread_getspecific() is too costly
*/
void *thr_ctx;
#if (NGX_EVENT_T_PADDING)
/* event should not cross cache line in SMP */
uint32_t padding[NGX_EVENT_T_PADDING];
#endif
#endif
};
// 有了数据结构支持后, 要处理队列就简单了, 只需遍历数据即可
// event/ngx_event_posted.c
void
ngx_event_process_posted(ngx_cycle_t *cycle, ngx_queue_t *posted)
{
ngx_queue_t *q;
ngx_event_t *ev;
while (!ngx_queue_empty(posted)) {
q = ngx_queue_head(posted);
ev = ngx_queue_data(q, ngx_event_t, queue);
ngx_log_debug1(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"posted event %p", ev);
// 先删除事件，再进行处理， 这在单进程单线程下没有问题的哟
ngx_delete_posted_event(ev);
// 调用 event 对应的handler 处理事件
// 所以核心在于这个 handler 的定义
ev->handler(ev);
}
}
以上的实现, 虽然是面向过程语言写的, 但因为有 struct 数据类型的支持, 实际上也是面向对象的概念呢.
4. io事件的监听实现
作为一个web服务器或者反向代理服务器, 其核心必然是网络io事件的处理. nginx 会根据不同的操作系统支持, 选择不同的io模型进行io事件的监听, 充分发挥系统的性能. 这也是其制胜之道吧. 具体如何确定哪种类型, 实际上可以在进行编译的时候, 获取系统变量来断定. (稍详细的说明, 见前面代码注释)
我们以 select 的实现来看看细节:
// event/module/ngx_select_module.c
// io 事件监听
static ngx_int_t
ngx_select_process_events(ngx_cycle_t *cycle, ngx_msec_t timer,
ngx_uint_t flags)
{
int ready, nready;
ngx_err_t err;
ngx_uint_t i, found;
ngx_event_t *ev;
ngx_queue_t *queue;
struct timeval tv, *tp;
ngx_connection_t *c;
// 获取 max_fd, 系统传值需要
if (max_fd == -1) {
for (i = 0; i < nevents; i++) {
c = event_index[i]->data;
if (max_fd < c->fd) {
max_fd = c->fd;
}
}
ngx_log_debug1(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"change max_fd: %i", max_fd);
}
#if (NGX_DEBUG)
if (cycle->log->log_level & NGX_LOG_DEBUG_ALL) {
for (i = 0; i < nevents; i++) {
ev = event_index[i];
c = ev->data;
ngx_log_debug2(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"select event: fd:%d wr:%d", c->fd, ev->write);
}
ngx_log_debug1(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"max_fd: %i", max_fd);
}
#endif
if (timer == NGX_TIMER_INFINITE) {
tp = NULL;
} else {
tv.tv_sec = (long) (timer / 1000);
tv.tv_usec = (long) ((timer % 1000) * 1000);
tp = &tv;
}
ngx_log_debug1(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"select timer: %M", timer);
work_read_fd_set = master_read_fd_set;
work_write_fd_set = master_write_fd_set;
// 在此处交由内核进行处理网络事件，epoll 机制，至少有一个事件到来时返回
// tp 代表是否要超时退出
ready = select(max_fd + 1, &work_read_fd_set, &work_write_fd_set, NULL, tp);
err = (ready == -1) ? ngx_errno : 0;
if (flags & NGX_UPDATE_TIME || ngx_event_timer_alarm) {
// 事件结束后，先尝试更新gmtTime 时间信息
ngx_time_update();
}
ngx_log_debug1(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"select ready %d", ready);
if (err) {
ngx_uint_t level;
if (err == NGX_EINTR) {
if (ngx_event_timer_alarm) {
ngx_event_timer_alarm = 0;
return NGX_OK;
}
level = NGX_LOG_INFO;
} else {
level = NGX_LOG_ALERT;
}
ngx_log_error(level, cycle->log, err, "select() failed");
if (err == NGX_EBADF) {
ngx_select_repair_fd_sets(cycle);
}
return NGX_ERROR;
}
if (ready == 0) {
if (timer != NGX_TIMER_INFINITE) {
return NGX_OK;
}
ngx_log_error(NGX_LOG_ALERT, cycle->log, 0,
"select() returned no events without timeout");
return NGX_ERROR;
}
nready = 0;
// 遍历所有事件
for (i = 0; i < nevents; i++) {
ev = event_index[i];
c = ev->data;
found = 0;
// 写事件处理
if (ev->write) {
if (FD_ISSET(c->fd, &work_write_fd_set)) {
found = 1;
ngx_log_debug1(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"select write %d", c->fd);
}
}
// 读或accept事件
else {
if (FD_ISSET(c->fd, &work_read_fd_set)) {
found = 1;
ngx_log_debug1(NGX_LOG_DEBUG_EVENT, cycle->log, 0,
"select read %d", c->fd);
}
}
// 读写就绪事件 found 都为1
if (found) {
ev->ready = 1;
ev->available = -1;
// 如果是 accept 事件则取 ngx_posted_accept_events 队列
// 否则取 ngx_posted_events 队列
queue = ev->accept ? &ngx_posted_accept_events
: &ngx_posted_events;
// 将事件插入到相应队列尾部
ngx_post_event(ev, queue);
// 有效就绪事件+1
nready++;
}
}
// 如果两个值不相等，则需要修正下
if (ready != nready) {
ngx_log_error(NGX_LOG_ALERT, cycle->log, 0,
"select ready != events: %d:%d", ready, nready);
ngx_select_repair_fd_sets(cycle);
}
return NGX_OK;
}
上面就是io事件的处理的了, 因为是 select 的实现, 所以调用系统的 select() 函数即可接收网络事件了. 具体能获取哪些事件, 实际上前面的工作已经决定了. 此处只是一个执行者的角色. 它是否高效, 则是取决于操作系统的io模型是否高效了. 有兴趣的同学可以看下 epoll 的实现.
5. accept 事件的处理
当系统发现有新的网络连接进来时, 会生成一个accept的事件, 给到应用. nginx 接收到accept事件后, 会放入 ngx_posted_accept_events 中, 然后调用通用队列处理方法处理队列. 此处的 handler 是 ngx_event_accept . 其核心工作就是建立新的socket连接, 以便后续读写.
// event/ngx_event_accept.c
// accept 事件处理入口
void
ngx_event_accept(ngx_event_t *ev)
{
socklen_t socklen;
ngx_err_t err;
ngx_log_t *log;
ngx_uint_t level;
ngx_socket_t s;
ngx_event_t *rev, *wev;
ngx_sockaddr_t sa;
ngx_listening_t *ls;
ngx_connection_t *c, *lc;
ngx_event_conf_t *ecf;
#if (NGX_HAVE_ACCEPT4)
static ngx_uint_t use_accept4 = 1;
#endif
if (ev->timedout) {
if (ngx_enable_accept_events((ngx_cycle_t *) ngx_cycle) != NGX_OK) {
return;
}
ev->timedout = 0;
}
// 获取配置信息
ecf = ngx_event_get_conf(ngx_cycle->conf_ctx, ngx_event_core_module);
if (!(ngx_event_flags & NGX_USE_KQUEUE_EVENT)) {
ev->available = ecf->multi_accept;
}
lc = ev->data;
ls = lc->listening;
ev->ready = 0;
ngx_log_debug2(NGX_LOG_DEBUG_EVENT, ev->log, 0,
"accept on %V, ready: %d", &ls->addr_text, ev->available);
// 循环处理socket数据
do {
socklen = sizeof(ngx_sockaddr_t);
#if (NGX_HAVE_ACCEPT4)
if (use_accept4) {
// 调用accept() 方法接入socket连接
s = accept4(lc->fd, &sa.sockaddr, &socklen, SOCK_NONBLOCK);
} else {
s = accept(lc->fd, &sa.sockaddr, &socklen);
}
#else
s = accept(lc->fd, &sa.sockaddr, &socklen);
#endif
if (s == (ngx_socket_t) -1) {
err = ngx_socket_errno;
if (err == NGX_EAGAIN) {
ngx_log_debug0(NGX_LOG_DEBUG_EVENT, ev->log, err,
"accept() not ready");
return;
}
level = NGX_LOG_ALERT;
if (err == NGX_ECONNABORTED) {
level = NGX_LOG_ERR;
} else if (err == NGX_EMFILE || err == NGX_ENFILE) {
level = NGX_LOG_CRIT;
}
#if (NGX_HAVE_ACCEPT4)
ngx_log_error(level, ev->log, err,
use_accept4 ? "accept4() failed" : "accept() failed");
if (use_accept4 && err == NGX_ENOSYS) {
use_accept4 = 0;
ngx_inherited_nonblocking = 0;
continue;
}
#else
ngx_log_error(level, ev->log, err, "accept() failed");
#endif
if (err == NGX_ECONNABORTED) {
if (ngx_event_flags & NGX_USE_KQUEUE_EVENT) {
ev->available--;
}
if (ev->available) {
continue;
}
}
if (err == NGX_EMFILE || err == NGX_ENFILE) {
if (ngx_disable_accept_events((ngx_cycle_t *) ngx_cycle, 1)
!= NGX_OK)
{
return;
}
if (ngx_use_accept_mutex) {
if (ngx_accept_mutex_held) {
ngx_shmtx_unlock(&ngx_accept_mutex);
ngx_accept_mutex_held = 0;
}
ngx_accept_disabled = 1;
} else {
ngx_add_timer(ev, ecf->accept_mutex_delay);
}
}
return;
}
#if (NGX_STAT_STUB)
(void) ngx_atomic_fetch_add(ngx_stat_accepted, 1);
#endif
ngx_accept_disabled = ngx_cycle->connection_n / 8
- ngx_cycle->free_connection_n;
// 获取socket读写指针
c = ngx_get_connection(s, ev->log);
if (c == NULL) {
if (ngx_close_socket(s) == -1) {
ngx_log_error(NGX_LOG_ALERT, ev->log, ngx_socket_errno,
ngx_close_socket_n " failed");
}
return;
}
c->type = SOCK_STREAM;
#if (NGX_STAT_STUB)
(void) ngx_atomic_fetch_add(ngx_stat_active, 1);
#endif
// 创建内存空间
c->pool = ngx_create_pool(ls->pool_size, ev->log);
if (c->pool == NULL) {
ngx_close_accepted_connection(c);
return;
}
if (socklen > (socklen_t) sizeof(ngx_sockaddr_t)) {
socklen = sizeof(ngx_sockaddr_t);
}
c->sockaddr = ngx_palloc(c->pool, socklen);
if (c->sockaddr == NULL) {
ngx_close_accepted_connection(c);
return;
}
ngx_memcpy(c->sockaddr, &sa, socklen);
log = ngx_palloc(c->pool, sizeof(ngx_log_t));
if (log == NULL) {
ngx_close_accepted_connection(c);
return;
}
/* set a blocking mode for iocp and non-blocking mode for others */
if (ngx_inherited_nonblocking) {
if (ngx_event_flags & NGX_USE_IOCP_EVENT) {
if (ngx_blocking(s) == -1) {
ngx_log_error(NGX_LOG_ALERT, ev->log, ngx_socket_errno,
ngx_blocking_n " failed");
ngx_close_accepted_connection(c);
return;
}
}
} else {
if (!(ngx_event_flags & NGX_USE_IOCP_EVENT)) {
if (ngx_nonblocking(s) == -1) {
ngx_log_error(NGX_LOG_ALERT, ev->log, ngx_socket_errno,
ngx_nonblocking_n " failed");
ngx_close_accepted_connection(c);
return;
}
}
}
*log = ls->log;
// 创建各种上下文环境给到socket连接
c->recv = ngx_recv;
c->send = ngx_send;
c->recv_chain = ngx_recv_chain;
c->send_chain = ngx_send_chain;
c->log = log;
c->pool->log = log;
c->socklen = socklen;
c->listening = ls;
c->local_sockaddr = ls->sockaddr;
c->local_socklen = ls->socklen;
#if (NGX_HAVE_UNIX_DOMAIN)
if (c->sockaddr->sa_family == AF_UNIX) {
c->tcp_nopush = NGX_TCP_NOPUSH_DISABLED;
c->tcp_nodelay = NGX_TCP_NODELAY_DISABLED;
#if (NGX_SOLARIS)
/* Solaris's sendfilev() supports AF_NCA, AF_INET, and AF_INET6 */
c->sendfile = 0;
#endif
}
#endif
rev = c->read;
wev = c->write;
wev->ready = 1;
if (ngx_event_flags & NGX_USE_IOCP_EVENT) {
rev->ready = 1;
}
if (ev->deferred_accept) {
rev->ready = 1;
#if (NGX_HAVE_KQUEUE || NGX_HAVE_EPOLLRDHUP)
rev->available = 1;
#endif
}
rev->log = log;
wev->log = log;
/*
* TODO: MT: - ngx_atomic_fetch_add()
* or protection by critical section or light mutex
*
* TODO: MP: - allocated in a shared memory
* - ngx_atomic_fetch_add()
* or protection by critical section or light mutex
*/
c->number = ngx_atomic_fetch_add(ngx_connection_counter, 1);
#if (NGX_STAT_STUB)
(void) ngx_atomic_fetch_add(ngx_stat_handled, 1);
#endif
if (ls->addr_ntop) {
c->addr_text.data = ngx_pnalloc(c->pool, ls->addr_text_max_len);
if (c->addr_text.data == NULL) {
ngx_close_accepted_connection(c);
return;
}
c->addr_text.len = ngx_sock_ntop(c->sockaddr, c->socklen,
c->addr_text.data,
ls->addr_text_max_len, 0);
if (c->addr_text.len == 0) {
ngx_close_accepted_connection(c);
return;
}
}
#if (NGX_DEBUG)
{
ngx_str_t addr;
u_char text[NGX_SOCKADDR_STRLEN];
ngx_debug_accepted_connection(ecf, c);
if (log->log_level & NGX_LOG_DEBUG_EVENT) {
addr.data = text;
addr.len = ngx_sock_ntop(c->sockaddr, c->socklen, text,
NGX_SOCKADDR_STRLEN, 1);
ngx_log_debug3(NGX_LOG_DEBUG_EVENT, log, 0,
"*%uA accept: %V fd:%d", c->number, &addr, s);
}
}
#endif
if (ngx_add_conn && (ngx_event_flags & NGX_USE_EPOLL_EVENT) == 0) {
if (ngx_add_conn(c) == NGX_ERROR) {
ngx_close_accepted_connection(c);
return;
}
}
log->data = NULL;
log->handler = NULL;
// 处理就绪的io事件，读写事件，此处将会转到 http 模块处理
ls->handler(c);
if (ngx_event_flags & NGX_USE_KQUEUE_EVENT) {
ev->available--;
}
} while (ev->available);
}
// http/ngx_http_request.c
// 初始化socket连接, 接入 http模块
void
ngx_http_init_connection(ngx_connection_t *c)
{
ngx_uint_t i;
ngx_event_t *rev;
struct sockaddr_in *sin;
ngx_http_port_t *port;
ngx_http_in_addr_t *addr;
ngx_http_log_ctx_t *ctx;
ngx_http_connection_t *hc;
#if (NGX_HAVE_INET6)
struct sockaddr_in6 *sin6;
ngx_http_in6_addr_t *addr6;
#endif
// 分配数据内存
hc = ngx_pcalloc(c->pool, sizeof(ngx_http_connection_t));
if (hc == NULL) {
ngx_http_close_connection(c);
return;
}
c->data = hc;
/* find the server configuration for the address:port */
port = c->listening->servers;
if (port->naddrs > 1) {
/*
* there are several addresses on this port and one of them
* is an "*:port" wildcard so getsockname() in ngx_http_server_addr()
* is required to determine a server address
*/
if (ngx_connection_local_sockaddr(c, NULL, 0) != NGX_OK) {
ngx_http_close_connection(c);
return;
}
// 根据网络类型处理
switch (c->local_sockaddr->sa_family) {
#if (NGX_HAVE_INET6)
case AF_INET6:
sin6 = (struct sockaddr_in6 *) c->local_sockaddr;
addr6 = port->addrs;
/* the last address is "*" */
for (i = 0; i < port->naddrs - 1; i++) {
if (ngx_memcmp(&addr6[i].addr6, &sin6->sin6_addr, 16) == 0) {
break;
}
}
hc->addr_conf = &addr6[i].conf;
break;
#endif
default: /* AF_INET */
sin = (struct sockaddr_in *) c->local_sockaddr;
addr = port->addrs;
/* the last address is "*" */
for (i = 0; i < port->naddrs - 1; i++) {
if (addr[i].addr == sin->sin_addr.s_addr) {
break;
}
}
hc->addr_conf = &addr[i].conf;
break;
}
} else {
switch (c->local_sockaddr->sa_family) {
#if (NGX_HAVE_INET6)
case AF_INET6:
addr6 = port->addrs;
hc->addr_conf = &addr6[0].conf;
break;
#endif
default: /* AF_INET */
addr = port->addrs;
hc->addr_conf = &addr[0].conf;
break;
}
}
/* the default server configuration for the address:port */
hc->conf_ctx = hc->addr_conf->default_server->ctx;
ctx = ngx_palloc(c->pool, sizeof(ngx_http_log_ctx_t));
if (ctx == NULL) {
ngx_http_close_connection(c);
return;
}
ctx->connection = c;
ctx->request = NULL;
ctx->current_request = NULL;
c->log->connection = c->number;
// 每个http server 都有自己的日志记录控制
c->log->handler = ngx_http_log_error;
c->log->data = ctx;
c->log->action = "waiting for request";
c->log_error = NGX_ERROR_INFO;
rev = c->read;
// 设置接收数据处理器为 ngx_http_wait_request_handler
rev->handler = ngx_http_wait_request_handler;
c->write->handler = ngx_http_empty_handler;
#if (NGX_HTTP_V2)
if (hc->addr_conf->http2) {
rev->handler = ngx_http_v2_init;
}
#endif
#if (NGX_HTTP_SSL)
{
ngx_http_ssl_srv_conf_t *sscf;
sscf = ngx_http_get_module_srv_conf(hc->conf_ctx, ngx_http_ssl_module);
if (sscf->enable || hc->addr_conf->ssl) {
hc->ssl = 1;
c->log->action = "SSL handshaking";
rev->handler = ngx_http_ssl_handshake;
}
}
#endif
if (hc->addr_conf->proxy_protocol) {
hc->proxy_protocol = 1;
c->log->action = "reading PROXY protocol";
}
if (rev->ready) {
/* the deferred accept(), iocp */
if (ngx_use_accept_mutex) {
ngx_post_event(rev, &ngx_posted_events);
return;
}
rev->handler(rev);
return;
}
// 将rev 放入到 ngx_event_timer_rbtree 队列中, 红黑树实现
ngx_add_timer(rev, c->listening->post_accept_timeout);
// 重用 connection
ngx_reusable_connection(c, 1);
// 处理 读就绪事件，注册 read 监听
if (ngx_handle_read_event(rev, 0) != NGX_OK) {
ngx_http_close_connection(c);
return;
}
}
// event/ngx_event.c
// 通用处理: 读事件逻辑
ngx_int_t
ngx_handle_read_event(ngx_event_t *rev, ngx_uint_t flags)
{
if (ngx_event_flags & NGX_USE_CLEAR_EVENT) {
/* kqueue, epoll */
if (!rev->active && !rev->ready) {
if (ngx_add_event(rev, NGX_READ_EVENT, NGX_CLEAR_EVENT)
== NGX_ERROR)
{
return NGX_ERROR;
}
}
return NGX_OK;
} else if (ngx_event_flags & NGX_USE_LEVEL_EVENT) {
/* select, poll, /dev/poll */
if (!rev->active && !rev->ready) {
// ngx_event_actions.add, 实际为 ngx_select_add_event
// 注册读事件
if (ngx_add_event(rev, NGX_READ_EVENT, NGX_LEVEL_EVENT)
== NGX_ERROR)
{
return NGX_ERROR;
}
return NGX_OK;
}
if (rev->active && (rev->ready || (flags & NGX_CLOSE_EVENT))) {
if (ngx_del_event(rev, NGX_READ_EVENT, NGX_LEVEL_EVENT | flags)
== NGX_ERROR)
{
return NGX_ERROR;
}
return NGX_OK;
}
} else if (ngx_event_flags & NGX_USE_EVENTPORT_EVENT) {
/* event ports */
if (!rev->active && !rev->ready) {
if (ngx_add_event(rev, NGX_READ_EVENT, 0) == NGX_ERROR) {
return NGX_ERROR;
}
return NGX_OK;
}
if (rev->oneshot && !rev->ready) {
if (ngx_del_event(rev, NGX_READ_EVENT, 0) == NGX_ERROR) {
return NGX_ERROR;
}
return NGX_OK;
}
}
/* iocp */
return NGX_OK;
}
大体上就是，先调用内核的accept() 方法，接入socket, 然后调用 http 模块init handler, 注册读事件， 以便后续可以读取数据。至于什么时候会进行真正地读数据请求，则不一定。
6. read 事件处理
经过前面的accept处理，nginx会注册read事件，且会将handler设置为 ngx_http_wait_request_handler, 当数据就绪后，就会从 通用处理队列 的入口处，转到http处理模块处理 io 事件。
// http/ngx_http_request.c
// 处理socket读事件
static void
ngx_http_wait_request_handler(ngx_event_t *rev)
{
u_char *p;
size_t size;
ssize_t n;
ngx_buf_t *b;
ngx_connection_t *c;
ngx_http_connection_t *hc;
ngx_http_core_srv_conf_t *cscf;
c = rev->data;
ngx_log_debug0(NGX_LOG_DEBUG_HTTP, c->log, 0, "http wait request handler");
if (rev->timedout) {
ngx_log_error(NGX_LOG_INFO, c->log, NGX_ETIMEDOUT, "client timed out");
ngx_http_close_connection(c);
return;
}
if (c->close) {
ngx_http_close_connection(c);
return;
}
hc = c->data;
cscf = ngx_http_get_module_srv_conf(hc->conf_ctx, ngx_http_core_module);
// 默认1024 缓冲大小
size = cscf->client_header_buffer_size;
b = c->buffer;
// 首次接入时，创建初始空间
if (b == NULL) {
// 创建缓冲区接收http传过来的数据
b = ngx_create_temp_buf(c->pool, size);
if (b == NULL) {
ngx_http_close_connection(c);
return;
}
c->buffer = b;
} else if (b->start == NULL) {
// 缓冲冲填满，需要另外增加空间？
b->start = ngx_palloc(c->pool, size);
if (b->start == NULL) {
ngx_http_close_connection(c);
return;
}
b->pos = b->start;
b->last = b->start;
b->end = b->last + size;
}
// 接收数据
n = c->recv(c, b->last, size);
if (n == NGX_AGAIN) {
if (!rev->timer_set) {
ngx_add_timer(rev, c->listening->post_accept_timeout);
ngx_reusable_connection(c, 1);
}
if (ngx_handle_read_event(rev, 0) != NGX_OK) {
ngx_http_close_connection(c);
return;
}
/*
* We are trying to not hold c->buffer's memory for an idle connection.
*/
// 如果还要等待更多数据，释放占有空间
if (ngx_pfree(c->pool, b->start) == NGX_OK) {
b->start = NULL;
}
return;
}
if (n == NGX_ERROR) {
ngx_http_close_connection(c);
return;
}
if (n == 0) {
ngx_log_error(NGX_LOG_INFO, c->log, 0,
"client closed connection");
ngx_http_close_connection(c);
return;
}
b->last += n;
// 如果配置了 proxy_pass （且匹配了模式）, 则直代理逻辑
if (hc->proxy_protocol) {
hc->proxy_protocol = 0;
p = ngx_proxy_protocol_read(c, b->pos, b->last);
if (p == NULL) {
ngx_http_close_connection(c);
return;
}
b->pos = p;
if (b->pos == b->last) {
c->log->action = "waiting for request";
b->pos = b->start;
b->last = b->start;
ngx_post_event(rev, &ngx_posted_events);
return;
}
}
c->log->action = "reading client request line";
// 设置不可重用连接
ngx_reusable_connection(c, 0);
// 创建 http 连接请求, 分配内存空, 设置下一个 handler 等等
c->data = ngx_http_create_request(c);
if (c->data == NULL) {
ngx_http_close_connection(c);
return;
}
// 设置读取数据的处理器为 ngx_http_process_request_line, 以便下次使用
rev->handler = ngx_http_process_request_line;
ngx_http_process_request_line(rev);
}
// http/ngx_http_request.c
// 读取body数据，并响应客户端
static void
ngx_http_process_request_line(ngx_event_t *rev)
{
ssize_t n;
ngx_int_t rc, rv;
ngx_str_t host;
ngx_connection_t *c;
ngx_http_request_t *r;
c = rev->data;
r = c->data;
ngx_log_debug0(NGX_LOG_DEBUG_HTTP, rev->log, 0,
"http process request line");
if (rev->timedout) {
ngx_log_error(NGX_LOG_INFO, c->log, NGX_ETIMEDOUT, "client timed out");
c->timedout = 1;
ngx_http_close_request(r, NGX_HTTP_REQUEST_TIME_OUT);
return;
}
rc = NGX_AGAIN;
for ( ;; ) {
if (rc == NGX_AGAIN) {
// 读取header
n = ngx_http_read_request_header(r);
if (n == NGX_AGAIN || n == NGX_ERROR) {
break;
}
}
// 读取body 数据, 按照http协议解析，非常长
rc = ngx_http_parse_request_line(r, r->header_in);
if (rc == NGX_OK) {
/* the request line has been parsed successfully */
r->request_line.len = r->request_end - r->request_start;
r->request_line.data = r->request_start;
r->request_length = r->header_in->pos - r->request_start;
ngx_log_debug1(NGX_LOG_DEBUG_HTTP, c->log, 0,
"http request line: \"%V\"", &r->request_line);
r->method_name.len = r->method_end - r->request_start + 1;
r->method_name.data = r->request_line.data;
if (r->http_protocol.data) {
r->http_protocol.len = r->request_end - r->http_protocol.data;
}
// 处理 uri, 解析路径
if (ngx_http_process_request_uri(r) != NGX_OK) {
break;
}
if (r->schema_end) {
r->schema.len = r->schema_end - r->schema_start;
r->schema.data = r->schema_start;
}
if (r->host_end) {
host.len = r->host_end - r->host_start;
host.data = r->host_start;
rc = ngx_http_validate_host(&host, r->pool, 0);
if (rc == NGX_DECLINED) {
ngx_log_error(NGX_LOG_INFO, c->log, 0,
"client sent invalid host in request line");
ngx_http_finalize_request(r, NGX_HTTP_BAD_REQUEST);
break;
}
if (rc == NGX_ERROR) {
ngx_http_close_request(r, NGX_HTTP_INTERNAL_SERVER_ERROR);
break;
}
if (ngx_http_set_virtual_server(r, &host) == NGX_ERROR) {
break;
}
r->headers_in.server = host;
}
if (r->http_version < NGX_HTTP_VERSION_10) {
if (r->headers_in.server.len == 0
&& ngx_http_set_virtual_server(r, &r->headers_in.server)
== NGX_ERROR)
{
break;
}
ngx_http_process_request(r);
break;
}
if (ngx_list_init(&r->headers_in.headers, r->pool, 20,
sizeof(ngx_table_elt_t))
!= NGX_OK)
{
ngx_http_close_request(r, NGX_HTTP_INTERNAL_SERVER_ERROR);
break;
}
c->log->action = "reading client request headers";
rev->handler = ngx_http_process_request_headers;
ngx_http_process_request_headers(rev);
break;
}
if (rc != NGX_AGAIN) {
/* there was error while a request line parsing */
ngx_log_error(NGX_LOG_INFO, c->log, 0,
ngx_http_client_errors[rc - NGX_HTTP_CLIENT_ERROR]);
if (rc == NGX_HTTP_PARSE_INVALID_VERSION) {
ngx_http_finalize_request(r, NGX_HTTP_VERSION_NOT_SUPPORTED);
} else {
ngx_http_finalize_request(r, NGX_HTTP_BAD_REQUEST);
}
break;
}
/* NGX_AGAIN: a request line parsing is still incomplete */
if (r->header_in->pos == r->header_in->end) {
rv = ngx_http_alloc_large_header_buffer(r, 1);
if (rv == NGX_ERROR) {
ngx_http_close_request(r, NGX_HTTP_INTERNAL_SERVER_ERROR);
break;
}
if (rv == NGX_DECLINED) {
r->request_line.len = r->header_in->end - r->request_start;
r->request_line.data = r->request_start;
ngx_log_error(NGX_LOG_INFO, c->log, 0,
"client sent too long URI");
ngx_http_finalize_request(r, NGX_HTTP_REQUEST_URI_TOO_LARGE);
break;
}
}
}
// 处理请求, 响应客户端
ngx_http_run_posted_requests(c);
}
// http/ngx_http_request.c
// 已经处理好的请求处理
void
ngx_http_run_posted_requests(ngx_connection_t *c)
{
ngx_http_request_t *r;
ngx_http_posted_request_t *pr;
// 循环处理数据，直到完成
for ( ;; ) {
if (c->destroyed) {
return;
}
r = c->data;
pr = r->main->posted_requests;
if (pr == NULL) {
return;
}
r->main->posted_requests = pr->next;
r = pr->request;
ngx_http_set_log_request(c->log, r);
ngx_log_debug2(NGX_LOG_DEBUG_HTTP, c->log, 0,
"http posted request: \"%V?%V\"", &r->uri, &r->args);
// 写客户端
r->write_event_handler(r);
}
}
以上就是一个简单视角的 http 请求的处理大体流程了。从中我们大概也理解了，nginx的处理逻辑，和我们想像的方案并没有太大差别，先读取url请求，判断是否特殊转发设置，读取body数据，如果没有特殊设置则定位到相应文件直接响应客户端。（具体如何响应，我们后续再说）
本篇主要站在一个全局的角度，整体上理解nginx的处理请求流程，希望对大家理解nginx有一定的帮助。当然有很多的细节还未厘清，敬请期待。
Recommend
About Joyk
Aggregate valuable and interesting links.
Joyk means Joy of geeK