Deploying the Percona Kubernetes Operator for XtraDB Cluster in Amazon (AWS)
source link: https://www.percona.com/blog/2020/01/21/deploying-the-percona-kubernetes-operator-for-xtradb-cluster-in-amazon-aws/
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
Being that Amazon is one of the most-used cloud vendors, it is only natural that one may ask “ How can Kubernetes be used in AWS? “. And the answer is – not that different than with other cloud vendors. What one needs is two things (and this applies universally): a Kubernetes cluster + the Percona XtraDB Cluster (PXC). Let’s start by creating the K8S cluster.
Amazon EKS
Like every other major cloud vendor, Amazon also has its own service available to make easy the task of creating and maintaining a K8S cluster called Amazon Elastic Kubernetes Service (EKS) . There are two ways to create the cluster: one is using a tool called eksctl (which is the one we are going to use) and the other one is using the AWS management console which is a more manual approach. Now, before deploying the cluster with eksctl, there are a few requirements that need to be met:
- Have kubectl installed
- Have the latest AWS CLI installed
- Have AWS IAM authenticator
- And, of course, have eksctl installed
Installing kubectl
There is more than one way to get kubectl. We are going to install the binary hosted by Amazon (compatible with the upstream version). The following steps are for Linux:
curl -o kubectl https://amazon-eks.s3-us-west-2.amazonaws.com/1.14.6/2019-08-22/<code class="replaceable">bin/linux/amd64/kubectl chmod +x ./kubectl mkdir -p $HOME/bin && cp ./kubectl $HOME/bin/kubectl && export PATH=$PATH:$HOME/bin
Once that is done, you can verify that the installation was done properly by asking for the version: kubectl version –short –client .
[root@ip-192-168-1-239 ~]# kubectl version --short --client Client Version: v1.14.7-eks-1861c5
All good!
Installing the AWS CLI
To get the new (experimental) AWS CLI version 2 , run:
curl "https://d1vvhvl2y92vvt.cloudfront.net/awscli-exe-linux-x86_64.zip" -o "awscliv2.zip" unzip awscliv2.zip sudo ./aws/install
Verifying:
[root@ip-192-168-1-239 ~]# /usr/local/bin/aws2 --version aws-cli/2.0.0dev3 Python/3.7.3 Linux/3.10.0-1062.1.2.el7.x86_64 botocore/2.0.0dev2
You can export the /usr/local/bin path to the environment variable PATH so you can use the “aws2” command directly.
Installing AWS IAM Authenticator
Similar to the previous installations, just run the following commands as described in the AWS IAM authenticator documentation :
curl -o aws-iam-authenticator https://amazon-eks.s3-us-west-2.amazonaws.com/1.14.6/2019-08-22/bin/linux/amd64/aws-iam-authenticator chmod +x ./aws-iam-authenticator mkdir -p $HOME/bin && cp ./aws-iam-authenticator $HOME/bin/aws-iam-authenticator && export PATH=$PATH:$HOME/bin
And validate:
[root@ip-192-168-1-239 ~]# aws-iam-authenticator help A tool to authenticate to Kubernetes using AWS IAM credentials Usage: aws-iam-authenticator [command] ......
Don’t forget to configure your AWS CLI credentials, for example (not real info):
$ aws2 configure AWS Access Key ID [None]: AKIAIOSFODNN7EXAMPLE AWS Secret Access Key [None]: wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY Default region name [None]: us-west-2 Default output format [None]: json
Installing eksctl
Similar instructions. Follow these steps:
curl --silent --location "https://github.com/weaveworks/eksctl/releases/download/latest_release/eksctl_$(uname -s)_amd64.tar.gz" | tar xz -C /tmp sudo mv /tmp/eksctl /usr/local/bin
And verify:
[root@ip-192-168-1-239 ~]# eksctl version
[ℹ] version.Info{BuiltAt:"", GitCommit:"", GitTag:"0.12.0"}
Now we are ready to deploy the Kubernetes cluster.
Creating the Kubernetes Cluster
And now the moment of truth. To create the cluster, one just needs to execute one command (with several parameters), but that is pretty much all. For this case, the command looks like this:
eksctl create cluster \ --name percona1 \ --version 1.14 \ --region us-east-2 \ --nodegroup-name percona-standard-workers \ --node-type t3.medium \ --nodes 3 \ --nodes-min 1 \ --nodes-max 4 \ --ssh-access \ --ssh-public-key /root/.ssh/id_rsa.pub \ --managed
The parameters used are just a small subset of everything that is available, and one that can seen by running “eksctl create cluster –help” , but for this case what we asked of EKS is to create a cluster named Percona using K8S version 1.14, in the aws region us-east-2 (Ohio), giving a name of percona-standard-workers to the nodegroup, using t3.medium EC2 instances for the nodes, with a total of three nodes (min 1 max 4), and enabling SSH access for the nodes using the SSH public key provided.
Note that all these parameters can be passed using a config file with YAML format, as explained in the documentation . Now, after the command is executed, the cluster is ready to be deployed. This process is not fast and could take around 15 minutes to finish . Be patient.
The output will look like this:
[ℹ] eksctl version 0.12.0
[ℹ] using region us-east-2
[ℹ] setting availability zones to [us-east-2a us-east-2b us-east-2c]
[ℹ] subnets for us-east-2a - public:192.168.0.0/19 private:192.168.96.0/19
[ℹ] subnets for us-east-2b - public:192.168.32.0/19 private:192.168.128.0/19
[ℹ] subnets for us-east-2c - public:192.168.64.0/19 private:192.168.160.0/19
[ℹ] using SSH public key "/root/.ssh/id_rsa.pub" as "eksctl-percona1-nodegroup-percona-standard-workers-5e:8e:f6:14:2f:5a:f1:40:6f:33:e9:53:4a:13:c5:40"
[ℹ] using Kubernetes version 1.14
[ℹ] creating EKS cluster "percona1" in "us-east-2" region with managed nodes
[ℹ] will create 2 separate CloudFormation stacks for cluster itself and the initial managed nodegroup
[ℹ] if you encounter any issues, check CloudFormation console or try 'eksctl utils describe-stacks --region=us-east-2 --cluster=percona1'
[ℹ] CloudWatch logging will not be enabled for cluster "percona1" in "us-east-2"
[ℹ] you can enable it with 'eksctl utils update-cluster-logging --region=us-east-2 --cluster=percona1'
[ℹ] Kubernetes API endpoint access will use default of {publicAccess=true, privateAccess=false} for cluster "percona1" in "us-east-2"
[ℹ] 2 sequential tasks: { create cluster control plane "percona1", create managed nodegroup "percona-standard-workers" }
[ℹ] building cluster stack "eksctl-percona1-cluster"
[ℹ] deploying stack "eksctl-percona1-cluster"
[ℹ] building managed nodegroup stack "eksctl-percona1-nodegroup-percona-standard-workers"
[ℹ] deploying stack "eksctl-percona1-nodegroup-percona-standard-workers"
[ℹ] all EKS cluster resources for "percona1" have been created
[ℹ] saved kubeconfig as "/root/.kube/config"
[ℹ] nodegroup "percona-standard-workers" has 3 node(s)
[ℹ] node "ip-192-168-17-143.us-east-2.compute.internal" is ready
[ℹ] node "ip-192-168-62-135.us-east-2.compute.internal" is ready
[ℹ] node "ip-192-168-86-219.us-east-2.compute.internal" is ready
[ℹ] waiting for at least 1 node(s) to become ready in "percona-standard-workers"
[ℹ] nodegroup "percona-standard-workers" has 3 node(s)
[ℹ] node "ip-192-168-17-143.us-east-2.compute.internal" is ready
[ℹ] node "ip-192-168-62-135.us-east-2.compute.internal" is ready
[ℹ] node "ip-192-168-86-219.us-east-2.compute.internal" is ready
[ℹ] kubectl command should work with "/root/.kube/config", try 'kubectl get nodes'
[ℹ] EKS cluster "percona1" in "us-east-2" region is ready
[root@ip-192-168-1-239 ~]#
You’ve got yourself a K8S cluster in AWS!
[root@ip-192-168-1-239 ~]# kubectl get nodes NAME STATUS ROLES AGE VERSION ip-192-168-17-143.us-east-2.compute.internal Ready <none> 12m v1.14.7-eks-1861c5 ip-192-168-62-135.us-east-2.compute.internal Ready <none> 12m v1.14.7-eks-1861c5 ip-192-168-86-219.us-east-2.compute.internal Ready <none> 12m v1.14.7-eks-1861c5 [root@ip-192-168-1-239 ~]# kubectl get svc NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE kubernetes ClusterIP 10.100.0.1 <none> 443/TCP 16m
Now we can install the Percona XtraDB Cluster operator.
Deploying the Percona Kubernetes Operator for Percona XtraDB Cluster
One can follow the instructions described in the document Install Percona XtraDB Cluster on Kubernetes so let’s do that.
Clone the repo and get into the dir:
git clone -b release-1.3.0 https://github.com/percona/percona-xtradb-cluster-operator cd percona-xtradb-cluster-operator
Deploy the Custom Resource Definition (CRD), add the pxc namespace, deploy the Role-Based Access Control (RBAC), the Secrets, the Operator, and finally the actual cluster:
[root@ip-192-168-1-239 percona-xtradb-cluster-operator]# kubectl apply -f deploy/crd.yaml customresourcedefinition.apiextensions.k8s.io/perconaxtradbclusters.pxc.percona.com created customresourcedefinition.apiextensions.k8s.io/perconaxtradbclusterbackups.pxc.percona.com created customresourcedefinition.apiextensions.k8s.io/perconaxtradbclusterrestores.pxc.percona.com created customresourcedefinition.apiextensions.k8s.io/perconaxtradbbackups.pxc.percona.com created [root@ip-192-168-1-239 percona-xtradb-cluster-operator]# kubectl create namespace pxc namespace/pxc created [root@ip-192-168-1-239 percona-xtradb-cluster-operator]# kubectl config set-context $(kubectl config current-context) --namespace=pxc Context "[email protected]" modified. [root@ip-192-168-1-239 percona-xtradb-cluster-operator]# kubectl apply -f deploy/rbac.yaml role.rbac.authorization.k8s.io/percona-xtradb-cluster-operator created serviceaccount/percona-xtradb-cluster-operator created rolebinding.rbac.authorization.k8s.io/service-account-percona-xtradb-cluster-operator created [root@ip-192-168-1-239 percona-xtradb-cluster-operator]# kubectl apply -f deploy/operator.yaml deployment.apps/percona-xtradb-cluster-operator created [root@ip-192-168-1-239 percona-xtradb-cluster-operator]# kubectl apply -f deploy/secrets.yaml secret/my-cluster-secrets created [root@ip-192-168-1-239 percona-xtradb-cluster-operator]# kubectl apply -f deploy/ssl-secrets.yaml secret/my-cluster-ssl created secret/my-cluster-ssl-internal created [root@ip-192-168-1-239 percona-xtradb-cluster-operator]# kubectl apply -f deploy/cr.yaml perconaxtradbcluster.pxc.percona.com/cluster1 created
Do we have PODs?
[root@ip-192-168-1-239 percona-xtradb-cluster-operator]# kubectl get pods NAME READY STATUS RESTARTS AGE cluster1-proxysql-0 3/3 Running 0 3m8s cluster1-proxysql-1 3/3 Running 0 2m45s cluster1-proxysql-2 3/3 Running 0 2m15s cluster1-pxc-0 1/1 Running 0 3m8s cluster1-pxc-1 1/1 Running 0 2m17s cluster1-pxc-2 1/1 Running 0 83s percona-xtradb-cluster-operator-745f649b97-842kd 1/1 Running 0 5m45s
Yeah, we do! Now you have yourself a PXC cluster running on K8S:
[root@ip-192-168-1-239 percona-xtradb-cluster-operator]# kubectl run -i --rm --tty percona-client --image=percona:5.7 --restart=Never -- bash -il If you don't see a command prompt, try pressing enter. bash-4.2$ mysql -h cluster1-proxysql -uroot -proot_password mysql: [Warning] Using a password on the command line interface can be insecure. Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 294 Server version: 5.7.28 (ProxySQL) Copyright (c) 2009-2019 Percona LLC and/or its affiliates Copyright (c) 2000, 2019, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> show status like 'w%cluster%'; +--------------------------+--------------------------------------+ | Variable_name | Value | +--------------------------+--------------------------------------+ | wsrep_cluster_weight | 3 | | wsrep_cluster_conf_id | 3 | | wsrep_cluster_size | 3 | | wsrep_cluster_state_uuid | 293dbaa9-3935-11ea-9b85-16abbd72615e | | wsrep_cluster_status | Primary | +--------------------------+--------------------------------------+ 5 rows in set (0.02 sec)
Note that the Operator comes with ProxySQL. Here’s thedesign overview. Now, to delete the cluster (and avoid cost surprises) you should run the following command: eksctl delete cluster –region us-east-2 –name percona1.
Interested in learning more?
Be sure to get in touch with Percona’s Training Department to schedule a hands-on tutorial session with our K8S Operator. Our instructors will guide you and your team through all the setup processes, learn how to take backups, handle recovery, scale the cluster, and manage high-availability with ProxySQL.
Recommend
About Joyk
Aggregate valuable and interesting links.
Joyk means Joy of geeK