118

GitHub - zxystd/IntelBluetoothFirmware: 尝试加载Intel蓝牙驱动固件

 4 years ago
source link: https://github.com/zxystd/IntelBluetoothFirmware
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.

IntelBluetoothFirmware

Intro

IntelBluetoothFirmware is a Kernel Extension that uploads Intel Wireless Bluetooth Firmware to provide native Bluetooth in macOS. The firmware binary files are from the Linux Open Source Project.

After several months of public testing, it appears that the Kext is working well and stable.

Supported Devices

Supports macOS 10.12 or higher, supported Device USB IDs are:

  • 0x8087, 0x0a2a
  • 0x8087, 0x07dc
  • 0x8087, 0x0aa7
  • 0x8087, 0x0025
  • 0x8087, 0x0aaa
  • 0x8087, 0x0026
  • 0x8087, 0x0029
  • 0x8087, 0x0a2b
  • 0x8087, 0x0032

Installation

Download the latest release, inject the Kext files into the Bootloader and then restart.

Do not inject the Kext files to /Library/Extensions or /System/Library/Extensions as it may likely break your system.

  • IntelBluetoothFirmware.kext

    Driver to upload the firmware.

  • IntelBluetoothInjector.kext

    Codeless Kext that enables On/Off switch on the Bluetooth settings panel, not necessary to install.

Troubleshooting

In case there is something wrong with the driver, please run the following command in Terminal:

log show --last boot | grep IntelFirmware

Save the driver logs, send it to me by opening an issue. If there are no logs, you should probably check your Bootloader, USB, BIOS, etc.

Credits


report

Recommend

About Joyk


Aggregate valuable and interesting links.
Joyk means Joy of geeK