Xdevillived666 said:

Yeah but manipulations are impossible. Like, if you're looking to use pdc tool to flash mbn files , just quit now.

Is it possibile to do things like enable volte? Thanks

tekno281 said:

Is it possibile to do things like enable volte, change imei or meid? Thanks

Volte has to be allowed by your carrier first. I had a first gen pixel and my carrier didn't support it for vllte. Contacted them and they pushed he settings from their end. I had to do some manipulation to trigger the proper mbn file and it ended up working.

However that was when debugging aosp vendor image from Google allowed diag mode . They don't now.

So short answer is no for enabling volte. In regards to the other stuff, I wanna say no as ell.

Imei spoofing might be an option

Meid, no idea

Xdevillived666 said:

Volte has to be allowed by your carrier first. I had a first gen pixel and my carrier didn't support it for vllte. Contacted them and they pushed he settings from their end. I had to do some manipulation to trigger the proper mbn file and it ended up working.

However that was when debugging aosp vendor image from Google allowed diag mode . They don't now.

So short answer is no for enabling volte. In regards to the other stuff, I wanna say no as ell.

Imei spoofing might be an option

Meid, no idea

Click to expand...

luqman.mirza said:

imei spoofing possible with that?

Not that I'm aware of

Xdevillived666 said:

Not that I'm aware of

luqman.mirza said:

But you said you were able to connect with the qpst. so did it get detected properly or not? because i want to make some changes in qcn under qpst. and can you please confirm the steps exactly you followed to enable diag port.

Phone and ports are recognised ,yeah but it doesn't open in qpst .like I can't modify anything. Only ever tried on pie . Haven't touched it on q. I followed pixel 2 qxdm thread where they have custom built magisk and module for it.

luqman.mirza said:

But you said you were able to connect with the qpst. so did it get detected properly or not? because i want to make some changes in qcn under qpst. and can you please confirm the steps exactly you followed to enable diag port.

luqman.mirza said:

imei spoofing possible with that?

elliwigy said:

imei spoofing is also illegal in many countries.. you tryna spy on someone or get free service lol

luqman.mirza said:

help

imei spoofing possible with that? because i'm in a country where the phone gets blocked by the imei, and i want to rewrite one. Yes it isn't legal but no other option instead of wasting my phone.

hi luqman did u successfully spoofed imei on pixel 3 .i made it but after a factory reser it resets to some 00204000......numbers

BADAMI said:

hi luqman did u successfully spoofed imei on pixel 3 .i made it but after a factory reser it resets to some 00204000......numbers

I have the same problem the factory reset then those numbers but to fix it it’s just 20 seconds.
only problem is, when I flash CalyxOS on it, I can’t enter Diag mode.
do you know any way around it?
cant seem to root calyx, I just need to enter Diag mode in caly, or is there a way I can root caly?

Nouman0114 said:

Hello everyone...
i'm facing issue while enabling diag port on Pixel 4 xl.
when i write adb shell then ok... after that i write "su" it says permission denied...

dcarvil said:

When you execute "su", you should receive a popup on the phone where you have to grant superuser permissions. You have only a few seconds to reply by default. Check Magisk, Settings, Superuser, for these 3 options:

Automatic Response
Request Timeout
Superuser Notification

Make sure none of them are set to Deny or None.

dcarvil said:

When you execute "su", you should receive a popup on the phone where you have to grant superuser permissions. You have only a few seconds to reply by default. Check Magisk, Settings, Superuser, for these 3 options:

Automatic Response
Request Timeout
Superuser Notification

Make sure none of them are set to Deny or None.