0
3D打印：3D打印用的PEI膜最佳打印热床温度为50℃
source link: https://www.taholab.com/23763
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
3D打印：3D打印用的PEI膜最佳打印热床温度为50℃
经过我多次测试，PEI膜最佳打印热床温度为50℃，过高或过低都会导致模型翘边。
除此之外，为了将打印率提高到百分百，最好在切片时再将打印附着类型改为Raft或者Brim，即加上可去除的薄底板或厚底板，下图是我的设置和打印效果：
2021-09-23
Previous Post: 飞行：在INAV中设置光流模块 OPTICAL FLOW & LIDAR SENSOR 3901-L0X
Recommend
About Joyk
Aggregate valuable and interesting links.
Joyk means Joy of geeK