4
BlackShark 3/3 Pro/3S unlock bootloader files.
source link: https://forum.xda-developers.com/t/blackshark-3-3-pro-3s-unlock-bootloader-files.4141537/page-5#post-87417485
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
Top Liked Posts
This unlocking method was researched by myself, so I bought two machines to study it.
I know that many Chinese can unlock the Bootloader, but they are unwilling to announce it.
They charge high unlock fees to unlock for users in need. This is shameful,I don't like selfish Chinese people.
so I plan to publish it directly.
Let all users have the right to choose whether to unlock, I hope you like it.
How to use it?
Both BlaskShark 3/3Pro and 3S can use this file to unlock the Bootloader.
No need to pay high fees to unlock.
Enter the edl mode method 1: when the phone is off, press and hold the volume up and down keys at the same time,
insert the USB cable to connect to the computer to enter the edl mode.
Entering edl mode Method 2: Turn on usb debugging on the phone, and run adb.exe reboot edl in cmd to enter edl mode.
and use the miflash tools to flash unlockfiles.
Then enter fastboot mode, run UnlockBL.bat to unlock your phone.
Enjoy it！
Download link:
mega.nz/file/fFMgDSzS#zc6_mOGJaLPUwO20IqfZMENJExuTaVRhpYhirsu4Xfw
Blackshark 3/3Pro TWRP download link:
mega.nz/folder/KU8DTZhR#M2YjCHUrmupBkovTam2HtQ
Blackshark 3 KLE-H0 global beta rom download link:
mega.nz/file/rc9EQaQK#0pEu0S95u0DIzO9lCLSl9_wVArc1YUbDN6iIE5elrD4
Blackshark 3 Pro MBU-H0 global rom download link:
mega.nz/file/vVUiTS5A#hOts3JROqqvWAdPKjvp_YqQ0I45av4CH4o26pFJAs84
Unlocking the Bootloader through this method may cause the fingerprint to be lost,
and it needs to be recalibrated before it can be used.
Fingerprint calibration tutorial
Enter *#*#466349#*#* on the dial keypad
Will jump to the fingerprint calibration interface,
Then click 售后校准, you will be prompted to Put the FLASH FLA then click START.
Click Start first, and then immediately press your thumb on the fingerprint module, keeping the phone from moving.
Wait for this step to be complete, then it will prompt Put the black FLAT
You can use black things, or wrap your thumb in black clothes, and then press and hold the fingerprint module.
Then wait for the calibration to complete
The fingerprint module must be completely covered during the calibration process, otherwise the unlock rate will decrease
After success, restart the phone to re-enter the fingerprint and use the fingerprint to unlock.
I know that many Chinese can unlock the Bootloader, but they are unwilling to announce it.
They charge high unlock fees to unlock for users in need. This is shameful,I don't like selfish Chinese people.
so I plan to publish it directly.
Let all users have the right to choose whether to unlock, I hope you like it.
How to use it?
Both BlaskShark 3/3Pro and 3S can use this file to unlock the Bootloader.
No need to pay high fees to unlock.
Enter the edl mode method 1: when the phone is off, press and hold the volume up and down keys at the same time,
insert the USB cable to connect to the computer to enter the edl mode.
Entering edl mode Method 2: Turn on usb debugging on the phone, and run adb.exe reboot edl in cmd to enter edl mode.
and use the miflash tools to flash unlockfiles.
Then enter fastboot mode, run UnlockBL.bat to unlock your phone.
Enjoy it！
Download link:
mega.nz/file/fFMgDSzS#zc6_mOGJaLPUwO20IqfZMENJExuTaVRhpYhirsu4Xfw
Blackshark 3/3Pro TWRP download link:
mega.nz/folder/KU8DTZhR#M2YjCHUrmupBkovTam2HtQ
Blackshark 3 KLE-H0 global beta rom download link:
mega.nz/file/rc9EQaQK#0pEu0S95u0DIzO9lCLSl9_wVArc1YUbDN6iIE5elrD4
Blackshark 3 Pro MBU-H0 global rom download link:
mega.nz/file/vVUiTS5A#hOts3JROqqvWAdPKjvp_YqQ0I45av4CH4o26pFJAs84
Unlocking the Bootloader through this method may cause the fingerprint to be lost,
and it needs to be recalibrated before it can be used.
Fingerprint calibration tutorial
Enter *#*#466349#*#* on the dial keypad
Will jump to the fingerprint calibration interface,
Then click 售后校准, you will be prompted to Put the FLASH FLA then click START.
Click Start first, and then immediately press your thumb on the fingerprint module, keeping the phone from moving.
Wait for this step to be complete, then it will prompt Put the black FLAT
You can use black things, or wrap your thumb in black clothes, and then press and hold the fingerprint module.
Then wait for the calibration to complete
The fingerprint module must be completely covered during the calibration process, otherwise the unlock rate will decrease
After success, restart the phone to re-enter the fingerprint and use the fingerprint to unlock.
Recommend
About Joyk
Aggregate valuable and interesting links.
Joyk means Joy of geeK