GitHub - dbisu/pico-ducky: Create a USB Rubber Ducky like device using a Raspber...
source link: https://github.com/dbisu/pico-ducky
Go to the source link to view the article. You can view the picture content, updated content and better typesetting reading experience. If the link is broken, please click the button below to view the snapshot at that time.
pico-ducky
Create a USB Rubber Ducky like device using a Raspberry PI Pico
Download circuitpython for pico board: https://circuitpython.org/board/raspberry_pi_pico/
Plug the Pico board into a USB port. The board will show up as a removable media device. Copy the UF2 file to the root of the media device.
The Pico board will reboot after installing the firmware image.
Download additional libraries: https://github.com/adafruit/Adafruit_CircuitPython_Bundle
https://github.com/adafruit/Adafruit_CircuitPython_Bundle/releases/tag/20210130
from zip file, unpack adafruit_hid folder. copy adafruit_hid to the lib folder.
Circuitpy HID https://learn.adafruit.com/circuitpython-essentials/circuitpython-hid-keyboard-and-mouse
Ducky Script Python
Copy duckyinpython.py to the root of the media device as code.py
$ cp duckyinpython.py //code.py
Copy your Ducky Scipt file as payload.dd
$ cp /path to media device>/payload.dd
NEW: added support for a programming switch.
Tie pin 0 (GPIO0) to pin 3 (GND) to not automatically run payloads. Easiest way to do this is to add a jumper wire between those pins.
Recommend
About Joyk
Aggregate valuable and interesting links.
Joyk means Joy of geeK