Cooling off your Raspberry Pi 4

I was very excited about the Raspberry Pi 4 , especially when I learned that it was available with 4GB of RAM - perfect for running a Kubernetes cluster using software like k3s.io and kubeadm . There's a number of options I've tried to add cooling to my Raspberry Pi and I thought I'd list them here and how effective they are.

Observing the temperature

Here's a very rudimentary way to observe the temperature of the RPi

while [ true ] ; do sleep 2 && sudo sudo /opt/vc/bin/vcgencmd measure_temp ; done

temp=32.0'C
temp=33.0'C
temp=31.0'C

Cooling off

Let's look at a few of the options for cooling off. If you think I've missed something, then please reach out over Twitter .

The Pimoroni heatsink

Pimoroni have a very cheap heatsink which you can order when you purchase your RPi. It looks like this, and can shave off a degree or two at idle.

The heat will be spread out, but not moved away from the device, so once it's hot, it will likely radiate that heat around the board.

You can't argue with 2.40 GBP - https://shop.pimoroni.com/products/raspberry-pi-4-heatsink

Pimoroni fan shim

This option does apply a decent amount of cooling at idle and under load, it also moves the heat away from the board unlike the heatsink.

Check it out from 9.60 GBP - https://shop.pimoroni.com/products/fan-shim

Heatsink case

This is not the most effective option, we'll see that next, but it is good at reducing the overall heat. It looks fantastic, and is practical on the go because it is also a case.

I feel it may be rather overpriced, but at least it comes in several colours. It's solid, and under load gets warm all over. Check it out from 12 GBP - https://shop.pimoroni.com/products/aluminium-heatsink-case-for-raspberry-pi-4?variant=29430673178707

ICE cooling tower

Here's my top pick, which can get a mostly idle k3s cluster down to 31c in no time. It lights up my whole office with blue light and has a subtle, but constant hum.

Check it out from 19.90 USD - https://www.seeedstudio.com/ICE-Tower-CPU-Cooling-Fan-for-Raspberry-pi-Support-Pi-4-p-4097.html

After attaching this fan and heatsink, you cannot use a case of any form or a base-plate. It probably is best left in once place for that reason. I would like to see Seeed Studio come up with something to place the RPi on.

Try the new firmware update

You can update the RPi's firmware as detailed here , and it may shed a few degrees depending on what cooling solution you're already using.

Note: you follow these instructions at your own risk.

Here's what you need to do:

• Update

sudo apt update && sudo apt upgrade -qy --no-install-recommends

• Reboot sudo reboot (don't skip this)

• Add the rpi-eeprom-update package

sudo apt install rpi-eeprom  -y

• Update

sudo rpi-eeprom-update

You should see output like "update required"

• Reboot sudo reboot (don't skip this)

Updating didn't appear to cause an issues for Docker or k3s, but I wouldn't recommend running rpi-update since that has usually caused issues for containers.

Wrapping up

I've listed the ways I've tried to cool my RPi and given you some links where you can go and purchase your own solutions. I prefer the heatsink case for its balance of form and function.

Follow me on Twitter @alexellisuk to make sure you never miss a post.

Here's some other related content you may like with your new cooler, RPi:

• Try my new blog post - Kubernetes Homelab with Raspberry Pi and k3sup

• k3sup ("ketchup") which can be used to install k3s to any computer, or VM and to install popular apps like Nginx, OpenFaaS and cert-manager .

• inletsctl - inlets OSS and inlets-pro can create HTTPS/TCP tunnels from your RPi to a computer with a public IP address, think of it like a poor-man's reverse SSH tunnel, or a free, OSS version of ngrok .