12

ROBEL: Robotics Benchmarks for Learning with Low-Cost Robots

 收集于1周前 阅读数 12
原文链接: https://chinagdg.org/2019/10/robel-robotics-benchmarks-for-learning-with-low-cost-robots/

ROBEL: Robotics Benchmarks for Learning with Low-Cost Robots

2019-10-10adminGoogleDevFeedsNo comments

Source: ROBEL: Robotics Benchmarks for Learning with Low-Cost Robots from Google Research

Posted by Michael Ahn, Software Engineer and Vikash Kumar, Research Scientist, Robotics at Google

Learning-based methods for solving robotic control problems have recently seen significant momentum, driven by the widening availability of simulated benchmarks (like dm_control or OpenAI-Gym) and advancements in flexible and scalable reinforcement learning techniques (DDPG, QT-Opt, or Soft Actor-Critic). While learning through simulation is effective, these simulated environments often encounter difficulty in deploying to real-world robots due to factors such as inaccurate modeling of physical phenomena and system delays. This motivates the need to develop robotic control solutions directly in the real world, on real physical hardware.

The majority of current robotics research on physical hardware is conducted on high-cost, industrial-quality robots (PR2, Kuka-arms, ShadowHand, Baxter, etc.) intended for precise, monitored operation in controlled environments. Furthermore, these robots are designed around traditional control methods that focus on precision, repeatability, and ease of characterization. This stands in sharp contrast with the learning-based methods that are robust to imperfect sensing and actuation, and demand (a) a high degree of resilience to allow real-world trial-and-error learning, (b) low cost and ease of maintenance to enable scalability through replication and (c) a reliable reset mechanism to alleviate strict human monitoring requirements.

In “ROBEL: Robotics Benchmarks for Learning with Low-Cost Robots”, to be presented at CoRL 2019, we introduce an open-source platform of cost-effective robots and curated benchmarks designed primarily to facilitate research and development on physical hardware in the real world. Analogous to an optical table in the field of optics, ROBEL serves as a rapid experimentation platform, supporting a wide range of experimental needs and the development of new reinforcement learning and control methods. ROBEL consists of D’Claw, a three-fingered hand robot that facilitates learning of dexterous manipulation tasks and D’Kitty, a four-legged robot that enables the learning of agile legged locomotion tasks. The robotic platforms are low-cost, modular, easy to maintain, and are robust enough to sustain on-hardware reinforcement learning from scratch.

image6.png

In order to make the robots relatively inexpensive and easy to build, we based ROBEL’s designs on off-the-shelf components and commonly-available prototyping tools (3D-printed or laser cut). Designs are easy to assemble and require only a few hours to build. Detailed part lists (with CAD details), assembly instructions, and software instructions for getting started are available here.

ROBEL Benchmarks
We devised a set of tasks suitable for each platform, D’Claw and D’Kitty, which can be used for benchmarking real-world robotic learning. ROBEL’s task definitions include both dense and sparse task objectives, and introduce metrics for hardware-safety in the task definition, which for example, indicate if joints are exceeding “safe” operating bounds or force thresholds. ROBEL also supports a simulator for all tasks to facilitate algorithmic development and rapid prototyping. D’Claw tasks are centered around three commonly observed manipulation behaviors — Pose, Turn, and Screw.

image17.png image19.png image20.png Left: Pose — Conform to the shape of the environment. Center: Turn — Turn the object to a specified angle. Right: Screw — Continuously rotate the object. (Click images for video.)

D’Kitty tasks are centered around three commonly observed locomotion behaviors — Stand, Orient, and Walk.

image141.png image10.png image191.png Left: Stand — Stand upright. Center: Orient — Align heading with the target. Right: Walk — Move to the target. (Click images for video.)

We evaluated several classes (on-policy, off policy, demo-accelerated, supervised) of deep reinforcement learning methods on each of these benchmark tasks. The evaluation results and the final policies are included as baselines in the software package for comparison. Full task details and baseline performances are available in the technical report.

Reproducibility & Robustness
ROBEL platforms are robust to sustain direct hardware training, and have clocked over 14,000 hours of real-world experience to-date. The platforms have significantly matured over the year. Owing to the modularity of the design, repairs are trivial and require minimal to no domain expertise, making the overall system easy to maintain.

To establish the replicability of the platforms and reproducibility of the benchmarks, ROBEL was studied in isolation by two different research labs. Only software distribution and documentation was used in this study. No in-person visits were allowed. Using ROBEL’s design files and assembly instructions both sites were able to replicate both hardware platforms. Benchmark tasks were trained on robots built at both sites. In the figure below we see that two D’Claw robots built at two different sites not only exhibit similar training progress but also converge to the same final performance, establishing reproducibility of the ROBEL benchmarks.

image16%2B-%2BEdited.png SAC training performance of a task on two real D’Claw robots developed at different laboratory locations.

Results Gallery
ROBEL has been useful in a variety of reinforcement learning studies so far. Below we highlight a few of the key results, and you can find all our results in this comprehensive gallery. D’Claw platforms are completely autonomous and can sustain reliable experimentation for an extended period of time, and has facilitated experimentation with a wide variety of reinforcement learning paradigms and tasks using both rigid and flexible objects.

FlexibleObjects.gif image13.gif image7.gif Left: Flexible Objects — On-hardware training with DAPG effectively learns to turn flexible objects. We observe manipulation targeting the center of the valve where there is more rigidity. D’Claw is robust to on-hardware training, facilitating successful outcomes on hard to simulate tasks. Center: Disturbance Rejection — A Sim2Real policy trained via Natural Policy Gradient on MuJoCo simulation with object perturbations (amongst others) being tested on hardware. We observe fingers working together to resist external disturbances. Right: Obstructed Finger — A Sim2Real policy trained via Natural Policy Gradient on MuJoCo simulation with external perturbations (amongst others) being tested on hardware. We observe that free fingers fill in for the missing finger.

Importantly, D’Claw platforms are modular and easy to replicate, which facilitates scalable experimentation. With our scaled setup, we find that multiple D’Claws can collectively learn tasks faster by sharing experience.

image10.gif On-hardware training with distributed version of SAC leaning to turn multiple objects to arbitrary angles in conjunction by sharing experience. Five tasks only need twice the amount of experience of single tasks, thanks to the multi-task formulation. In the video we observe five D’Claws turning different objects to 180 degrees (picked for visual effectiveness, actual policy can turn to any angle).

We have also been successful in deploying robust locomotion policies on the D’Kitty platform. Below we show a blind D’Kitty walking over indoor and outdoor terrains exhibiting the robustness of its gait in presence of unseen disturbances.

clutter.gif gravel.gif slope.gif Left: Indoor – Walking in Clutter — A Sim2Real policy trained via Natural Policy Gradient on MuJoCo simulation with randomized perturbations learns to walk in clutter and step over objects. Center: Outdoor – Gravel and Branches — A Sim2Real policy trained via Natural Policy Gradient on MuJoCo simulation with randomized height field learns to walk outdoors over gravel and branches. Right: Outdoor – Slope and Grass — A Sim2Real policy trained via Natural Policy Gradient on MuJoCo simulation with randomized height field learns to handle moderate slopes.

When presented with information about its torso and objects present in the scene, D’Kitty can learn to interact with these objects exhibiting complex behaviors.

avoid.gif push.gif co-ordinate.gif Left: Avoid Moving Obstacles — Policy trained via Hierarchical Sim2Real learns to avoid a moving block and reach the target (marked by the controller on the floor). Center: Push to Moving Goal — Policy trained via Hierarchical Sim2Real learns to push block towards a moving target (marked by the controller in the hand). Right: Co-ordinate — Policy trained via Hierarchical Sim2Real learns to coordinate two D’Kitties to push a heavy block towards a target (marked by two + signs on the floor).

In conclusion, ROBEL platforms are low cost, robust, reliable and are designed to accommodate the needs of the emerging learning-based paradigms that need scalability and resilience. We are proud to announce the release of ROBEL to the open source community and are excited to learn about the diversity of research and experimentation they will enable. For getting started on ROBEL platforms and ROBEL benchmarks refer to roboticsbenchmarks.org.

Acknowledgments
Google’s ROBEL D’Claw evolved from earlier designs Vikash Kumar developed at the Universities of Washington and Berkeley. Multiple people across organizations have contributed towards the ROBEL projects. We thank our co-authors Henry Zhu (UC Berkeley), Kristian Hartikainen (UC Berkeley), Abhishek Gupta (UC Berkeley) and Sergey Levine (Google and UC Berkeley) for their contributions and extensive feedback throughout the project. We would like to acknowledge Matt Neiss (Google) and Chad Richards (Google) for their significant contribution to the platform designs. We would also like to thank Aravind Rajeshwaran (U-Washington), Emo Todorov (U-Washington), and Vincent Vanhoucke (Google) for their helpful discussions and comments throughout the project.


猜你喜欢

关于极客头条


聚合每日国内外有价值,有趣的链接。