Live MySQL Slave Rebuild with Percona Toolkit

Recently, we had an edge case where a MySQL slave went out-of-sync but it couldn’t be rebuilt from scratch. The slave was acting as a master server to some applications and it had data was being written to it. It was a design error, and this is not recommended, but it happened. So how do you synchronize the data in this circumstance? This blog post describes the steps taken to recover from this situation. The tools used to recover the slave werept-slave-restart,  pt-table-checksum ,pt-table-sync and mysqldiff .

Scenario

To illustrate this situation, it was built a master x slave configuration with sysbench  running on the master server to simulate a general application workload. The environment was set with a Percona Server 5.7.24-26 and sysbench 1.0.16.

Below are the sysbench commands to prepare and simulate the workload:

# Create Data
sysbench --db-driver=mysql --mysql-user=root --mysql-password=msandbox \
  --mysql-socket=/tmp/mysql_sandbox45008.sock --mysql-db=test --range_size=100 \
  --table_size=5000 --tables=100 --threads=1 --events=0 --time=60 \
  --rand-type=uniform /usr/share/sysbench/oltp_read_only.lua prepare
 
# Simulate Workload
sysbench --db-driver=mysql --mysql-user=root --mysql-password=msandbox \
  --mysql-socket=/tmp/mysql_sandbox45008.sock --mysql-db=test --range_size=100 \
  --table_size=5000 --tables=100 --threads=10 --events=0 --time=6000 \
  --rand-type=uniform /usr/share/sysbench/oltp_read_write.lua --report-interval=1 run

With the environment set, the slave server was stopped, and some operations to desynchronize the slave were performed to reproduce the problem.

Fixing the issue

With the slave desynchronized, a restart on the replication was executed. Immediately, the error below appeared:

Last_IO_Errno: 1236
Last_IO_Error: Got fatal error 1236 from master when reading data from binary log: 'Could not find first log file name in binary log index file'

To recover the slave from this error, we had to point the slave to an existing binary log with a valid binary log position. To get a valid binary log position, the command shown below had to be executed on the master :

master [localhost] {msandbox} ((none)) > show master status\G
*************************** 1. row ***************************
File: mysql-bin.000007
Position: 218443612
Binlog_Do_DB:
Binlog_Ignore_DB:
Executed_Gtid_Set:
1 row in set (0.01 sec)

Then, a CHANGE MASTER command was run on the slave :

slave1 [localhost] {msandbox} (test) > change master to master_log_file='mysql-bin.000007', MASTER_LOG_POS=218443612;
Query OK, 0 rows affected (0.00 sec)
 
slave1 [localhost] {msandbox} (test) > start slave;
Query OK, 0 rows affected (0.00 sec)

Now the slave had a valid binary log file to read, but since it was inconsistent, it hit another error:

               Last_SQL_Errno: 1032
               Last_SQL_Error: Could not execute Delete_rows event on table test.sbtest8; Can't find record in 'sbtest8', Error_code: 1032; handler error HA_ERR_KEY_NOT_FOUND; the event's master log mysql-bin.000005, end_log_pos 326822861

Working past the errors

Before fixing the inconsistencies, it was necessary to keep the replication running and to skip the errors. For this, thept-slave-restart tool will be used. The tool needs to be run on the slave server:

pt-slave-restart --user root --socket=/tmp/mysql_sandbox45008.sock --ask-pass

The tool skips errors and starts the replication threads. Below is an example of the output of the pt-slave-restart :

$ pt-slave-restart --user root --socket=/tmp/mysql_sandbox45009.sock --ask-pass
Enter password:
2019-02-22T14:18:01 S=/tmp/mysql_sandbox45009.sock,p=...,u=root mysql-relay.000007        1996 1146
2019-02-22T14:18:02 S=/tmp/mysql_sandbox45009.sock,p=...,u=root mysql-relay.000007        8698 1146
2019-02-22T14:18:02 S=/tmp/mysql_sandbox45009.sock,p=...,u=root mysql-relay.000007       38861 1146

Finding the inconsistencies

With the tool running on one terminal, the phase to check the inconsistencies began. First things first, an object definition check was performed using mysqldiff utility. The mysqldiff tool is part of MySQL utilities . To execute the tool:

$ mysqldiff --server1=root:msandbox@localhost:48008 --server2=root:msandbox@localhost:48009 test:test --difftype=sql --changes-for=server2

And below are the differences found between the master and the slave:

1-) A table that doesn’t exist

# WARNING: Objects in server1.test but not in server2.test:
# TABLE: joinit

2-) A wrong table structure

# Comparing `test`.`sbtest98` to `test`.`sbtest98` [FAIL]
# Transformation for --changes-for=server2:
#
 
ALTER TABLE `test`.`sbtest98`
DROP INDEX k_98,
DROP COLUMN x,
ADD INDEX k_98 (k);

Performing the recommendations on the slave (creating the table and the table modification) the object’s definition was now equal. The next step was to check data consistency. For this, thept-table-checksum was used to identify which tables are out-of-sync. This command was run on the master server.

$ pt-table-checksum -uroot -pmsandbox --socket=/tmp/mysql_sandbox48008.sock --replicate=percona.checksums --create-replicate-table --empty-replicate-table --no-check-binlog-format --recursion-method=hosts

And an output example:

01 master]$ pt-table-checksum --recursion-method dsn=D=percona,t=dsns --no-check-binlog-format --nocheck-replication-filter --host 127.0.0.1 --user root --port 48008 --password=msandbox
Checking if all tables can be checksummed ...
Starting checksum ...
  at /usr/bin/pt-table-checksum line 332.
Replica lag is 66 seconds on bm-support01.bm.int.percona.com.  Waiting.
Replica lag is 46 seconds on bm-support01.bm.int.percona.com.  Waiting.
Replica lag is 33 seconds on bm-support01.bm.int.percona.com.  Waiting.
 
           TS ERRORS  DIFFS     ROWS  DIFF_ROWS  CHUNKS SKIPPED    TIME TABLE
02-26T16:27:59      0      0     5000          0       1       0   0.037 test.sbtest1
02-26T16:27:59      0      0     5000          0       1       0   0.039 test.sbtest10
02-26T16:27:59      0      1     5000          0       1       0   0.033 test.sbtest100
02-26T16:27:59      0      1     5000          0       1       0   0.034 test.sbtest11
02-26T16:27:59      0      1     5000          0       1       0   0.040 test.sbtest12
02-26T16:27:59      0      1     5000          0       1       0   0.034 test.sbtest13

Fixing the data inconsistencies

Analyzing the DIFFS column it is possible to identify which tables were compromised. With this information, thept-table-sync tool was used to fix these inconsistencies. The tool synchronizes MySQL table data efficiently, performing non-op changes on the master so they can be replicated and applied on the slave. The tools need to be run on the slave server. Below is an example of the tool running:

$ pt-table-sync --execute --sync-to-master h=localhost,u=root,p=msandbox,D=test,t=sbtest100,S=/tmp/mysql_sandbox48009.sock

It is possible to perform a dry-run of the tool before executing the changes to check what changes the tool will apply:

$ pt-table-sync --print --sync-to-master h=localhost,u=root,p=msandbox,D=test,t=sbtest100,S=/tmp/mysql_sandbox48009.sock
REPLACE INTO `test`.`sbtest100`(`id`, `k`, `c`, `pad`) VALUES ('1', '1654', '97484653464-60074971666-42998564849-40530823048-27591234964-93988623123-02188386693-94155746040-59705759910-14095637891', '15000678573-85832916990-95201670192-53956490549-57402857633') /*percona-toolkit src_db:test src_tbl:sbtest100 src_dsn:D=test,P=48008,S=/tmp/mysql_sandbox48009.sock,h=127.0.0.1,p=...,t=sbtest100,u=root dst_db:test dst_tbl:sbtest100 dst_dsn:D=test,S=/tmp/mysql_sandbox48009.sock,h=localhost,p=...,t=sbtest100,u=root lock:1 transaction:1 changing_src:1 replicate:0 bidirectional:0 pid:17806 user:vinicius.grippa host:bm-support01.bm.int.percona.com*/;
REPLACE INTO `test`.`sbtest100`(`id`, `k`, `c`, `pad`) VALUES ('2', '3007', '31679133794-00154186785-50053859647-19493043469-34585653717-64321870163-33743380797-12939513287-31354198555-82828841987', '30122503210-11153873086-87146161761-60299188705-59630949292') /*percona-toolkit src_db:test src_tbl:sbtest100 src_dsn:D=test,P=48008,S=/tmp/mysql_sandbox48009.sock,h=127.0.0.1,p=...,t=sbtest100,u=root dst_db:test dst_tbl:sbtest100 dst_dsn:D=test,S=/tmp/mysql_sandbox48009.sock,h=localhost,p=...,t=sbtest100,u=root lock:1 transaction:1 changing_src:1 replicate:0 bidirectional:0 pid:17806 user:vinicius.grippa host:bm-support01.bm.int.percona.com*/;

After executing the pt-table-sync , we recommend that you run the pt-table-checksum again and check if the DIFFS column shows the value of 0.

Conclusion

This blog post was intended to cover all possible issues that could happen on a slave when it goes out-of-sync such as DDL operations, binary log purge and DML operations. This process involves many steps and it could take a long time to finish, especially in large databases. Note that this process might take longer than the backup/restore process. However, in situations like the one mentioned above, it might be the only solution to recover a slave.

—

Image based on Photo by  Randy Fath  on  Unsplash