README.md

Download ZIP | Join us on Slack | Mailing List

Sirix - An Evolutionary Tree-Structured Storage System

Effective And Efficient Storing And Querying Of Snapshots

"Remember that you're lucky, even if you don't think you are, because there's always something that you can be thankful for." - Esther Grace Earl (http://tswgo.org)

Storing and querying of your temporal data

Sirix is a storage system, which brings versioning to a sub-file granular level while taking full advantage of flash based drives as for instance SSDs. As such per revision as well as per page deltas are stored. Time-complexity for retrieval of records/nodes and the storage are logarithmic (O(log n)). Space complexity is linear (O(n)). Currently, we provide several APIs which are layered. A very low level page-API, which handles the storage and retrieval of records on a per page-fragment level (whereas a buffer manager handles the caching of pages in-memory and the versioning takes place even on a lower layer for storing and reconstructing the page-fragments in CPU-friendly algorithms), a cursor based API to store and navigate through records (currently XML/XDM nodes) on top, a DOM-alike node layer for simple in-memory processing of these nodes, which is used by Brackit, a sophisticated XQuery processor. And last but not least a RESTful asynchronous HTTP-API. Our goal is to provide a seamless integration of a native JSON layer besides the XML node layer, that is extending the XQuery Data Model (XDM) with other node types (support for JSONiq through the XQuery processor Brackit). In general, however we could store every kind of data. We provide

1. The current revision of the resource or any subset thereof;
2. The full revision history of the resource or any subset thereof;
3. The full modification history of the resource or any subset thereof.

We not only support all XPath axis (as well as a few more like as for instance a PostOrderAxis) to query a resource in one revision but also novel temporal axis which facilitate navigation in time. A transaction (cursor) on a resource can be started either by specifying a specific revision number (to open a revision/version/snapshot of a resource) or by a given point in time. The latter starts a transaction on the revision number which was committed closest to the given timestamp.

Table of contents

• Getting Started
  • Download ZIP or Git Clone
  • Maven Artifacts
  • Docker Images
  • Command line tool
  • First steps
  • Documentation
• RESTful-API
• DOM alike API ?
• Simple XQuery Examples
• Getting Help
  • Mailinglist
  • Join us on Slack
• Visualizations
• Why should you even bother?
• Features in a nutshell
• Developers
• Further information
• License
• Involved People

Getting started

Download ZIP or Git Clone

git clone https://github.com/sirixdb/sirix.git

or use the following dependencies in your Maven (or Gradle?) project.

Maven artifacts

At this stage of development please use the latest SNAPSHOT artifacts from the OSS snapshot repository. Just add the following repository section to your POM file:

<repository>
  <id>sonatype-nexus-snapshots</id>
  <name>Sonatype Nexus Snapshots</name>
  <url>https://oss.sonatype.org/content/repositories/snapshots</url>
  <releases>
    <enabled>false</enabled>
  </releases>
  <snapshots>
    <enabled>true</enabled>
  </snapshots>
</repository>

Note that we changed the groupId from com.github.sirixdb.sirix to io.sirix.

Maven artifacts are deployed to the central maven repository (however please use the SNAPSHOT-variants as of now). Currently the following artifacts are available:

Core project:

<dependency>
  <groupId>io.sirix</groupId>
  <artifactId>sirix-core</artifactId>
  <version>0.8.9-SNAPSHOT</version>
</dependency>

Brackit binding:

<dependency>
  <groupId>io.sirix</groupId>
  <artifactId>sirix-xquery</artifactId>
  <version>0.8.9-SNAPSHOT</version>
</dependency>

Asynchronous, RESTful API with Vert.x, Kotlin and Keycloak (the latter for authentication via OAuth2/OpenID-Connect):

<dependency>
  <groupId>io.sirix</groupId>
  <artifactId>sirix-rest-api</artifactId>
  <version>0.8.9-SNAPSHOT</version>
</dependency>

Other modules are currently not available (namely the GUI, the distributed package as well as an outdated Saxon binding).

Docker images for the Sirix HTTP(S)-Server / the REST-API

First, we need a running Keycloak server for now on port 8080.

As a Keycloak instance is needed for the RESTful-API we'll build a simple docker compose file maybe with a demo database user and some roles in the future.

For running a keycloak docker container you could for instance use the following docker command: docker run -d --name keycloak -p 8080:8080 -e KEYCLOAK_USER=admin -e KEYCLOAK_PASSWORD=admin -e KEYCLOAK_LOGLEVEL=DEBUG jboss/keycloak. Afterwards it can be configured via a Web UI: http://localhost:8080. Keycloak is needed for our RESTful, asynchronous API. It is the authorization server instance.

Docker images of Sirix can be pulled from Docker Hub (sirixdb/sirix). However the easiest way for now is to download Sirix, then

1. Change into the sirix-rest-api bundle: cd bundles/sirix-rest-api
2. Change the configuration in src/main/resources/sirix-conf.json and add the secret from Keycloak (see for instance this great tutorial and change the HTTP(S)-Server port Sirix is listening on:

1. You can simply use the example key.pem/cert.pem files in src/main/resources for HTTPS (for example.org), but you have to change it, once we release the stable version for production. Then you for sure have to use a certificate/key for your domain. You could use Let's Encrypt for instance to get an SSL/TLS certificate for free.
2. Build the docker image: docker build -t sirixdb/sirix
3. Run the docker container: docker run --network=host -t -i -p 9443:9443 sirixdb/sirix (on Windows this does not seem to work)

Sirix should be up and running afterwards. Please let us know if you have any trouble setting it up.

Command line tool

We ship a (very) simple command line tool for the sirix-xquery bundle:

Get the latest sirix-xquery JAR with dependencies.

First steps

Please have a look into our sirix-example project how to use Sirix from Java.

Documentation

We are currently working on the documentation. You may find first drafts and snippets in the Wiki and in this README. Furthermore you are kindly invited to ask any question you might have (and you likely have many questions) on the mailinglist (preferred) or in the Slack channel. Please also have a look at and play with our sirix-example bundle which is available via maven or our new asynchronous RESTful API (shown next).

The following sections show different APIs to interact with Sirix.

RESTful-API

We provide a simple, asynchronous RESTful-API. Authorization is done via OAuth2 (Password Credentials/Resource Owner Flow) using a Keycloak authorization server instance. Keycloak can be set up as described in this excellent tutorial All you have to change is setting the client-id to "sirix" and put the client secret into our configuration file. Change the value of "client.secret" to whatever Keycloak set up (can be found on the credetials tab of your account). Regarding Keycloak the direct access grant on the settings tab must be enabled. Our user-roles are "create" to allow creating databases/resources, "view" to allow to query database resources, "modify" to modify a database resource and "delete" to allow deletion thereof. Furthermore, a key.pem and a cert.pem file are needed. These two files have to be in your user home directory in a directory called "sirix-data", where Sirix stores the databases. For demo purposes they can be copied from our resources directory.

To created a fat-JAR. Download our ZIP-file for instance, then

1. cd bundles/sirix-rest-api
2. mvn clean package -DskipTests

And a fat-JAR with all required dependencies should have been created in your target folder.

Once also Keycloak is set up we can start the server via:

java -jar -Duser.home=/opt/intrexx sirix-rest-api-*-SNAPSHOT-fat.jar -conf sirix-conf.json -cp opt/intrexx/*

If you like to change your user home directory to /opt/intrexx for instance.

The fat-JAR in the future will be downloadable from the maven repository.

After Keycloak and our server are up and running, we can write a simple HTTP-Client. We first have to obtain a token from the /login endpoint with a given "username/password" JSON-Object. Using an asynchronous HTTP-Client (from Vert.x) in Kotlin, it looks like this:

val server = "https://localhost:9443"

val credentials = json {
  obj("username" to "testUser",
      "password" to "testPass")
}

val response = client.postAbs("$server/login").sendJsonAwait(credentials)

if (200 == response.statusCode()) {
  val user = response.bodyAsJsonObject()
  val accessToken = user.getString("access_token")
}

This access token must then be sent in the Authorization HTTP-Header for each subsequent request. Storing a first resource would look like (simple HTTP PUT-Request):

val xml = """
    <xml>
      foo
      <bar/>
    </xml>
""".trimIndent()

var httpResponse = client.putAbs("$server/database/resource1").putHeader(HttpHeaders.AUTHORIZATION.toString(), "Bearer $accessToken").sendBufferAwait(Buffer.buffer(xml))
  
if (200 == response.statusCode()) {
  println("Stored document.")
} else {
  println("Something went wrong ${response.message}")
}

First, an empty database with the name database with some metadata is created, second the XML-fragment is stored with the name resource1. The PUT HTTP-Request is idempotent. Another PUT-Request with the same URL endpoint would just delete the former database and resource and create the database/resource again.

The HTTP-Response should be 200 and the HTTP-body yields:

<rest:sequence xmlns:rest="https://sirix.io/rest">
  <rest:item>
    <xml rest:id="1">
      foo
      <bar rest:id="3"/>
    </xml>
  </rest:item>
</rest:sequence>

We are serializing the generated IDs from our storage system for element-nodes.

Via a GET HTTP-Request to https://localhost:9443/database/resource1 we are also able to retrieve the stored resource again.

However, this is not really interesting so far. We can update the resource via a POST-Request. Assuming we retrieved the access token as before, we can simply do a POST-Request and use the information we gathered before about the node-IDs:

val xml = """
    <test>
      yikes
      <bar/>
    </test>
""".trimIndent()

val url = "$server/database/resource1?nodeId=3&insert=asFirstChild"

val httpResponse = client.postAbs(url).putHeader(HttpHeaders.AUTHORIZATION
                         .toString(), "Bearer $accessToken").sendBufferAwait(Buffer.buffer(xml))

The interesting part is the URL, we are using as the endpoint. We simply say, select the node with the ID 3, then insert the given XML-fragment as the first child. This yields the following serialized XML-document:

<rest:sequence xmlns:rest="https://sirix.io/rest">
  <rest:item>
    <xml rest:id="1">
      foo
      <bar rest:id="3">
        <test rest:id="4">
          yikes
          <bar rest:id="6"/>
        </test>
      </bar>
    </xml>
  </rest:item>
</rest:sequence>

The interesting part is that every PUT- as well as POST-request does an implicit commit of the underlying transaction. Thus, we are now able send the first GET-request for retrieving the contents of the whole resource again for instance through specifying an simple XPath-query, to select the root-node in all revisions GET https://localhost:9443/database/resource1?query=/xml/all-time::* and get the following XPath-result:

<rest:sequence xmlns:rest="https://sirix.io/rest">
  <rest:item rest:revision="1" rest:revisionTimestamp="2018-12-20T18:44:39.464Z">
    <xml rest:id="1">
      foo
      <bar rest:id="3"/>
    </xml>
  </rest:item>
  <rest:item rest:revision="2" rest:revisionTimestamp="2018-12-20T18:44:39.518Z">
    <xml rest:id="1">
      foo
      <bar rest:id="3">
        <xml rest:id="4">
          foo
          <bar rest:id="6"/>
        </xml>
      </bar>
    </xml>
  </rest:item>
</rest:sequence>

The same can be achieved through specifying a range of revisions to serialize (start- and end-revision parameters) in the GET-request:

GET https://localhost:9443/database/resource1?start-revision=1&end-revision=2

or via timestamps:

GET https://localhost:9443/database/resource1?start-revision-timestamp=2018-12-20T18:00:00&end-revision-timestamp=2018-12-20T19:00:00

We for sure are also able to delete the resource or any subtree thereof by an updating XQuery expression (which is not very RESTful) or with a simple DELETE HTTP-request:

val url = "$server/database/resource1?nodeId=3"

val httpResponse = client.deleteAbs(url).putHeader(HttpHeaders.AUTHORIZATION
                         .toString(), "Bearer $accessToken").sendAwait()

if (200 == httpResponse.statusCode()) {
  ...
}

This deletes the node with ID 3 and in our case as it's an element node the whole subtree. For sure it's committed as revision 3 and as such all old revisions still can be queried for the whole subtree (or in the first revision it's only the element with the name "bar" without any subtree).

https://github.com/sirixdb/sirix/wiki/RESTful-API gives an overview about the API.

DOM alike API

Think of this rather low level API as a persistent (in the sense of storing it to disk/a flash drive) DOM interface for Sirix, whereas nodes can be selected by a transactional cursor API by their unique identifier, which has been created during insertion with a sequence generator. Another DOM like API is available through our XQuery layer, which adds a simple Interface for in-memory node instances. However the low level API, which we are describing below doesn't have to have all nodes in-memory (and it usually doesn't). Nodes are fetched from variable length pages which have been either cached by a buffer manager in memory or reside on the flash drive or a spinning disk and have to be read from a file.

// Path to the database.
final Path file = Paths.get("sirix-database");

// Create the database.
final DatabaseConfiguration config = new DatabaseConfiguration(file);
Databases.createDatabase(config);

// Open the database.
try (final Database database = Databases.openDatabase(file)) {
  /* 
   * Create a resource in the database with the name "resource1".
   * Store deweyIDs (hierarchical node labels), use text node compression,
   * build a summary of all paths in the resource and use the SLIDING_SNAPSHOT
   * versioning algorithm.
   */
  database.createResource(
            ResourceConfiguration.newBuilder("resource1", config)
                                 .useDeweyIDs(true)
                                 .useTextCompression(true)
                                 .buildPathSummary(true)
                                 .versioningApproach(Versioning.SLIDING_SNAPSHOT)
                                 .build());
  try (
      // Start a resource manager on the given resource.
      final ResourceManager manager = database.getResourceManager("resource1");
      // Start the single read/write transaction.
      final XdmNodeWriteTrx wtx = manager.beginNodeWriteTrx()) {
    // Import an XML-document.
    wtx.insertSubtreeAsFirstChild(XMLShredder.createFileReader(LOCATION.resolve("input.xml")));
    
    // Move to the node which automatically got the node-key 2 from Sirix during the import of the XML-document.
    wtx.moveTo(2);
    
    // Then move the subtree located at this node to the first child of node 4.
    wtx.moveSubtreeToFirstChild(4)
    
    // Get the name of the current node.
    final QName name = wtx.getName();
    
    // Get the value of the current node.
    final String value = wtx.getValue();
    
    // Commit revision 1.
    wtx.commit();
    
    // Reuse transaction handle and insert an element to the first child where the current transaction cursor resides.
    wtx.insertElementAsFirstChild(new QName("foo"));
    
    // Commit revision 2 with a commit message.
    wtx.commit("[MOD] Inserted another element.");

    // Serialize the revision back to XML.
    final OutputStream out = new ByteArrayOutputStream();
    new XMLSerializer.XMLSerializerBuilder(manager, out).prettyPrint().build().call();

    System.out.println(out);
  }
} catch (final SirixException | IOException | XMLStreamException e) {
  // LOG or do anything, the database is closed properly.
}

There are N reading transactions as well as one write-transaction permitted on a resource.

A read-only transaction can be opened through:

final XdmNodeReadTrx rtx = manager.beginNodeReadTrx()

The codè above starts a transaction on the most recent revision.

The following code starts a transaction at revision 1.

final XdmNodeReadTrx rtx = manager.beginNodeReadTrx(1)

The next read only transaction is going to be stared on the revision, which has been committed at the closest timestamp to the given point in time.

final LocalDateTime time = LocalDateTime.of(2018, Month.APRIL, 28, 23, 30);
final XdmNodeReadTrx rtx = manager.beginNodeReadTrx(time.toInstant())

There are also several ways to start the single write-transaction:

  /**
   * Begin exclusive read/write transaction without auto commit.
   *
   * @throws SirixThreadedException if the thread is interrupted
   * @throws SirixUsageException if the number of write-transactions is exceeded for a defined time
   * @return {@link XdmNodeWriteTrx} instance
   */
  XdmNodeWriteTrx beginNodeWriteTrx();

  /**
   * Begin exclusive read/write transaction with auto commit.
   *
   * @param maxNodes count of node modifications after which a commit is issued
   * @throws SirixThreadedException if the thread is interrupted
   * @throws SirixUsageException if the number of write-transactions is exceeded for a defined time
   * @throws IllegalArgumentException if {@code maxNodes < 0}
   * @return {@link XdmNodeWriteTrx} instance
   */
  XdmNodeWriteTrx beginNodeWriteTrx(@Nonnegative int maxNodes);

  /**
   * Begin exclusive read/write transaction with auto commit.
   *
   * @param timeUnit unit used for time
   * @param maxTime time after which a commit is issued
   * @throws SirixThreadedException if the thread is interrupted
   * @throws SirixUsageException if the number of write-transactions is exceeded for a defined time
   * @throws IllegalArgumentException if {@code maxTime < 0}
   * @throws NullPointerException if {@code timeUnit} is {@code null}
   * @return {@link XdmNodeWriteTrx} instance
   */
  XdmNodeWriteTrx beginNodeWriteTrx(TimeUnit timeUnit, int maxTime);

  /**
   * Begin exclusive read/write transaction with auto commit.
   *
   * @param maxNodes count of node modifications after which a commit is issued
   * @param timeUnit unit used for time
   * @param maxTime time after which a commit is issued
   * @throws SirixThreadedException if the thread is interrupted
   * @throws SirixUsageException if the number of write-transactions is exceeded for a defined time
   * @throws IllegalArgumentException if {@code maxNodes < 0}
   * @throws NullPointerException if {@code timeUnit} is {@code null}
   * @return {@link XdmNodeWriteTrx} instance
   */
  XdmNodeWriteTrx beginNodeWriteTrx(@Nonnegative int maxNodes, TimeUnit timeUnit, int maxTime);

With wtx.revertTo(int) you're able to revert everything to an old revision (given by the integer). Followed by a commit the former version is commited as a new revision.

Use one of the provided axis to navigate through the DOM-like tree-structre (for instance in level order only through level 4):

final LevelOrderAxis axis = new LevelOrderAxis.Builder(rtx).includeSelf().filterLevel(4).build()

Post-order traversal:

final PostOrderAxis axis = new PostOrderAxis(rtx)

And many more (for instance all XPath axis).

Or navigate to a specific node and then in time, for instance through all future revisions or all past revisions...:

final FutureAxis axis = new FutureAxis(rtx)

final PastAxis axis = new PastAxis(rtx)

and many more as well.

Besides, we for instance provide diff-algorithms to import differences between several versions of (currently XML)-documents.

For instance after storing one revision in Sirix, we can import only the differences encountered by a sophisticated tree-to-tree diff-algorithm.

final Path resOldRev = Paths.get("sirix-resource-to-update");
final Path resNewRev = Paths.get("new-revision-as-xml-file");

FMSEImport.dataImport(resOldRev, resNewRev);

Furthermore we provide diff-algorithms to determine all differences between any two revisions once they are stored in Sirix. To enable a fast diff-algorithm we optionally store a merkle-tree (that is each node stores an additional hash-value).

In order to invoke a diff you either use with a resource-manager and an immutable set of observers (2 and 1 are the revision numbers to compare):

DiffFactory.invokeFullDiff(
    new DiffFactory.Builder(resourceMgr, 2, 1, DiffOptimized.HASHED, ImmutableSet.of(observer)))

Or you invoke a structural diff, which does not check attributes or namespace-nodes:

DiffFactory.invokeStructuralDiff(
    new DiffFactory.Builder(resourceMgr, 2, 1, DiffOptimized.HASHED, ImmutableSet.of(observer)))

An observer simply has to implement this interface:

/**
 * Interface for observers, which are listening for diffs.
 *
 * @author Johannes Lichtenberger, University of Konstanz
 *
 */
public interface DiffObserver {
  /**
   * Called for every node comparsion.
   *
   * @param diffType the {@link DiffType} type
   * @param newNodeKey node key of node in new revision
   * @param oldNodeKey node key of node in old revision
   * @param depth current {@link DiffDepth} instance
   */
  void diffListener(@Nonnull DiffType diffType, long newNodeKey, long oldNodeKey,
      @Nonnull DiffDepth depth);

  /** Signals that the diff calculation is done. */
  void diffDone();
}

On top of this API we built a brackit(.org) binding, which enables XQuery support as well as another DOM-alike API with DBNode-instances (in-memory) nodes (for instance public DBNode getLastChild(), public DBNode getFirstChild(), public Stream<DBNode> getChildren()...). You can also mix the APIs.

Simple XQuery Examples

Test if fragments of the resource are not present in the past. In this example they are appended to a node in the most recent revision and stored in a subsequent revision)

(* Loading document: *)
bit:load('mydoc.xml', '/tmp/sample8721713104854945959.xml')

(* Update loaded document: *)
let $doc := doc('mydoc.xml')
INSERT NODES <a><b/>test</a> INTO $doc/log

(* intermediate explicit commit *)
sdb:commit($doc)

(* Query loaded document: *)
doc('mydoc.xml')/log/all-time::*
(* First version: *)
<log tstamp="Fri Jun 14 07:59:08 CEST 2013" severity="low">
  <src>192.168.203.49</src>
  <msg>udic fyllwx abrjxa apvd</msg>
</log>
(* Second version: *)
<log tstamp="Fri Jun 14 07:59:08 CEST 2013" severity="low">
  <src>192.168.203.49</src>
  <msg>udic fyllwx abrjxa apvd</msg>
  <a>
    <b/>
    test
  </a>
</log>

(* Query loaded document (nodes, which are children of the log-element but did not exist in the past): *)
(* The second revision is initially loaded *)
doc('mydoc.xml', 2)/log/*[not(past::*)]
<a>
  <b/>
  test
</a>

Creation of a path index for all paths (note that we already can keep a path summary):

// Create and commit path index on all elements.
try (final DBStore store = DBStore.newBuilder().build()) {
  final QueryContext ctx3 = new QueryContext(store);
  final XQuery q = new XQuery(new SirixCompileChain(store),
      "let $doc := sdb:doc('mydocs.col', 'resource1', (), fn:boolean(1)) "
          + "let $stats := sdb:create-path-index($doc, '//*') "
          + "return <rev>{sdb:commit($doc)}</rev>");
  q.serialize(ctx3, System.out);
}

Temporal XPath axis extensions include:

future::
future-or-self::
past::
past-or-self::
previous::
previous-or-self::
next::
next-or-self::
first::
last::
all-time::

Many more examples of creating name indexes, content and structure indexes and how to query them can be found in the examples module.

Have a look into the wiki for examples regarding a lower level (really powerful) cursor based API to navigate/and or modify the tree structure or to navigate in time.

A lot of the ideas still stem from the Ph.D. thesis of Marc Kramis: Evolutionary Tree-Structured Storage: Concepts, Interfaces, and Applications

http://www.uni-konstanz.de/mmsp/pubsys/publishedFiles/Kramis2014.pdf

As well as from Sebastian Graft's work and thesis:

https://kops.uni-konstanz.de/handle/123456789/27250

Getting Help

Mailinglist

Any questions or even consider to contribute or use Sirix? Use the Mailing List to ask questions. Any kind of question, may it be a API-question or enhancement proposal, questions regarding use-cases are welcome... Don't hesitate to ask questions or make suggestions for improvements. At the moment also API-related suggestions and critics are of utmost importance.

Join us on Slack

You may find us on Slack for quick questions.

Visualizations (built on top of the cursor-based transaction API)

The following diagram shows a screenshot of an interactive visualization, which depicts moves of single nodes or whole subtress through hierarchical edge bundling.

A screencast is available depicting the SunburstView and the TextView side by side: http://www.youtube.com/watch?v=l9CXXBkl5vI

Currently, as we focused on various improvements in performance and features of the core storage system, the visualizations are a bit dated (and not working), but in the future we aim to bring them into the web (for instance using d3) instead of providing a standalone desktop GUI.

Why should you even bother?

Do you have to handle irregular data without knowing the schema before storing the data? You currently store this data in a relational DBMS? Maybe a tree-structured (XML or JSON) storage system much better suits your needs as it doesn't require a predefined schema before even knowing the structure of the data which has to be persisted.

Do you have to store a snapshot of this irregular data? Furthermore questions such as

• How do we store snapshots of time varying data effectively and efficiently?
• How do we know which data has been modified ever since a specified snapshot/revision?
• How do we store the differences between two XML documents? Is the storage system able to determine the differences itself?
• Which item has been sold the most during the last month/year?
• Which item has the most sold copies?
• Which items have been added?
• Which items have been deleted?

Sirix might be a good fit if you have to answer any of these questions as it stores data efficiently and effectively. Furthermore Sirix handles the import of differences between a Sirix-resource and a new version thereof in the form of an XML-document (soon JSON as well). Thus, an algorithm takes care of determining the differences and transforms the stored resource into a new snapshot/revision/version, which is the same as the new XML document once the newest revision is serialized (despite whitespace). Despite this, we also support the import of a series of snapshots of temporal data, whereas the detection of the differences is completely up to Sirix. Specifying unique node-IDs to match pairs of nodes is not required.

Once several (for instance at the very minimum two) versions of resources have been stored in Sirix it's possible to determine the differences of subtrees or the whole resource/tree-structure.

Furthermore you are encouraged to navigate and query a Sirix resource not only in space but also in time.

Opening a specific version is possible with XQuery, the Java-API or a RESTful Web-Service. Serializing either a single version or a bunch of versions is also supported. Despite, future work includes the specification of a delta-format.

In addition Sirix provides a very powerful axis-API and exposes each XPath-axis as well as all temporal axis (to navigate in time), a LevelOrderAxis, a PostorderAxis and a special DescendantVisitorAxis which is able to use a visitor, skip whole subtrees from traversal (might also depend on the depth), terminate the processing and to skip the traversal of sibling nodes. Furthermore all filters for instance to filter specific nodes, QNames, text-values and so on are exposed. In contrast to other XML database systems we also support the movement of whole subtrees, without having to delete and reinsert the subtree (which would also change unique node-IDs). Furthermore it is easy to store other record-types as the built-in (XDM) types.

All index-structures are always kept up-to-date and versioned just as the data itself. A path summary stores reference-counters, that is how many nodes are stored on a specific path.

In contrast to some other approaches we also store path class records (PCR), that is the node-IDs of path summary nodes in the value indexes.

Furthermore in stark contrast to all other approaches the authors are aware of moves are supported, which preserve node-identity and aren't simple combinations of insert/delete-subtree operations. Instead only local changes take place. However with the path summary and other index-structures enabled the operation is likewise costly.

Features in a nutshell

• Transactional, versioned, typed user-defined index-structures, which are automatically updated once a transaction commits.
• Through XPath-axis extensions we support the navigation not only in space but also in time (future::, past::, first::, last::...). Furthermore we provide several temporal XQuery functions due to our integral versioning approach.
• An in memory path summary, which is persisted during a transaction commit and always kept up-to-date.
• Configurable versioning at the database level (full, incremental, differential and a new sliding snapshot algorithm which balances reads and writes without introducing write-peaks, which are usually generated during intermediate full dumps, which are usually written to).
• Log-structured sequential writes and random reads due to transactional copy-on-write (COW) semantics. This offers nice benefits as for instance no locking for concurrent reading-transactions and it takes full advantage of flash disks while avoiding their weaknesses.
• Complete isolation of currently N read-transactions and a single write-transaction per resource.
• The page-structure is heavily inspired by ZFS and therefore also forms a tree. We'll implement a similar merkle-tree and store hashes of each page in parent-pointers for integrity checks.
• Support of XQuery and XQuery Update due to a slightly modified version of brackit(.org).
• Moves are additionally supported.
• Automatic path-rewriting of descendant-axis to child-axis if appropriate.
• Import of differences between two XML-documents, that is after the first version of an XML-document is imported an algorithm tries to update the Sirix resource with a minimum of operations to change the first version into the new version.
• A fast ID-based diff-algorithm which is able to determine differences between any two versions of a resource stored in Sirix optionally taking hashes of a node into account.
• The number of children of a node, the number of descendants, a hash as well as an ORDPATH / DeweyID label which is compressed on disk to efficiently determine document order as well as to support other nice properties of hierarchical node labels is optionally stored with each node. Currently the number of children is always stored and the number of descendants is stored if hashing is enabled.
• Flexible backend.
• Optional encryption and/or compression of each page on disk.

Furthermore we aim to support an extended XDM in order to store JSON natively with additional node-types in Sirix. The implementation should be straight forward. Afterwards we'll explore how to efficiently distribute Sirix with Vert.x or directly via an Ignite or Hazelcast data grid.

Besides, the architecture for versioning data is not restricted to tree-structures by all means as demonstrated in the Ph.D. Thesis of Sebastian Graf (Sirix originated a few years ago as a fork of Treetank going back to its roots and focusing on the versioning of tree-structured data): http://nbn-resolving.de/urn:nbn??bsz:352-272505

Storing files natively is also on our agenda.

Developers

Developers which are eager to put forth the idea of a versioned, secure database system especially suitable, but not restricted to rooted trees (serialized form as XML/JSON) are always welcome. The idea is not only to support (and extend querying) as for instance via XQuery efficiently, but also to support other datamining tasks such as the comparison of hierarchical tree-structures.

More visualizations

Further information

Sirix was initially forked from Treetank (https://github.com/disy/treetank). As such my deepest gratitude to all the other students who worked on the project.

First of all:

• Marc Kramis for his first drafts,
• Sebastian Graf for his almost complete rewrite of Treetank,
• Patrick Lang (RESTful API),
• Lukas Lewandowski (RESTful API),
• Tina Scherer (XPath engine)

and all the others who worked on the project.

License

This work is released in the public domain under the BSD 3-clause license

Involved People

Sirix is maintained by:

• Johannes Lichtenberger

Your name might follow? ;-)